This wiki is not maintained! Do not use this when setting up AuScope experiments!

Differences

This shows you the differences between two versions of the page.

--- handover:aov011 [2016/09/20 17:39]
Jesse Swan
+++ handover:aov011 [2016/09/20 21:26]
Jesse Swan
@@ Line 15: / Line 15: @@
 Data volume at beginning: 6.090 GB
-  * During setup, ke dbbc needed a power cycle, This fixed the issue of drifting time difference and bad auto correl spectra. (AK)
+  * 17:30 Experiment started okay (Liz)
+  * 17:35 UT Alarm "mark 5 reports sync error. Check clock stability." which developed into "dbbcn:error connect():dbbc device connection open timed-out". Had to halt schedule, power cycle the DBBC and fmset to fix. First good scan 264-1815 (Liz)
+  * 18:25 UT Autocorrelations showing distinct but small delta-like peaks along the whole image. Better than before DBBC cycled so just leaving and watching for now. (Liz)
+  * 20:44 UT and 21:19UT "WARNING: error an -103 pointing computer tracking errors are too large. WARNING: error qo -301 warning: onsource status is slewing! ALARM: error m5 -900 not while recording or playing" Acknowledged alarm, seems not to have affected anything (Liz).
+  *
+.264.20:43:04 WARNING: error m5 -906 mark5 return code 6: inconsistent or conflicting request
 **Yarragadee 12m:**
-Disk VSN: GSFC+017
+Disk VSN: HOB+0100
-  * Experiment started late as slow changing modules.
+  * 17:52UT Experiment started late as slow changing modules since yg operator didn't know we needed a new module after he took the r1 module out... First scan: 264-1752 (Liz)
@@ Line 29: / Line 35: @@
 ~~DISCUSSION~~