This wiki is not maintained! Do not use this when setting up AuScope experiments!

Differences

This shows you the differences between two versions of the page.

--- handover:aov012 [2016/10/12 20:12]
Jesse Swan
+++ handover:aov012 [2016/10/13 00:32]
Jesse Swan
@@ Line 9: / Line 9: @@
   * 1945UT SystemClock1 errors. Attempting to diagnose (JS)
   * 1950UT Looks like the generator has died at hb, Brett is going out to refuel (JS)
-      * Affected scans: 286-1941 to ...
+      * Affected scans: 286-1941 to 286-2307a. ie first good scan was 286-2311
+  * 2311UT Experiment restarted (Liz)
@@ Line 15: / Line 17: @@
 Disk VSN: HART+104, start 7040.11 GB
+Disk VSN: HOB+0015, start 1533.39 GB
   * 1730UT Experiment started okay (JS)
+  * 2117UT Katherine switched back to bank A (HOB+0015) since bank B was at capacity.
+<note warning>HOB+0015 will need to be shipped off for the r1761. So it's best to start recording to a third module as soon as we can, and then retrieve the data for this experiment from HOB+0015 later before shipping. Speak to the on-site person when they're in to switch out a module</note>
+  * 0030UT Katherine switched back to bank B (XAO-1013) for bank A (HOB+0015) to be able to be shipped etc for r1761. (Liz)
+       * Missed scans 287-0027 and 287-0029 (Liz)
 **yarragadee 12m:**
@@ Line 27: / Line 36: @@
   * 1752UT Onsource for 286-1752a (JS)
      * missed scans: 286-1730 to 286-1745
+  * 2345UT For some time yg has had formatter to fs time difference 0.5s or greater as mk5=dot? response nearly 1 sec out. According to Jamie fix with fmset  after this experiment end. (Liz)
 {{tag>}}