User Tools

Site Tools


handover:r4855

This wiki is not maintained! Do not use this when setting up AuScope experiments!

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Next revision
Previous revision
Last revision Both sides next revision
handover:r4855 [2018/08/16 22:15]
Atifur R. Khan
handover:r4855 [2018/08/17 16:27]
Atifur R. Khan
Line 6: Line 6:
  
     * 18:30 UT At beginning of experiment Jamie had to delete info off of the HAY module because it was full. Otherwise experiment started OK.     * 18:30 UT At beginning of experiment Jamie had to delete info off of the HAY module because it was full. Otherwise experiment started OK.
 +    * 06:13 (229)  UT  source 1243-160 above elevation limit? tracking errors for scan 229-0612b
 +    * 7:19 UT ALARM: Delay through DBBC has changed Monitor for stability and reset DBBC if it drifts. Reconfiguring the DBBC. Affected scans: 229-0731 - 229-0740 (Simin)
 +    * 8:07 UT Restarting DBBC. Affected scans: 229-0812 - 229-0815a (Simin)
 +    * 9:01 UT Drifting again. Called Warren and he suggest to shut down the DBBC to  cool it down(Simin) ​
 +    * 9:20 UT Having problem with VNC so Warren called Mick to solve the problem (Simin)
 +    * 10:18 UT Reconfiguring the DBBC. Affected scans: 229-0900 - 229-1016 (Simin)
 +    * 16:30UT Maser VNC down (Arwin)
 +    * 1630UT Intermittent error " WARNING: error ib   -4 gpib device time-out on response c2" has been happening since start of experiment. Everything seems normal(Arwin)
  
 **Yarragadee** **Yarragadee**
/home/www/auscope/opswiki/data/pages/handover/r4855.txt · Last modified: 2018/08/17 16:30 by Atifur R. Khan