This wiki is not maintained! Do not use this when setting up AuScope experiments!

Differences

This shows you the differences between two versions of the page.

--- handover:start [2018/12/12 20:41]
Tiege McCarthy
+++ handover:start [2019/01/29 08:29]
Simin Salarpour
@@ Line 1: / Line 1: @@
+====== R1879 ======
-====== RD1810 ======
+**Katherine 12m**
+   * 06:08 UT: ALARM: error st -998 reading systemclock1; ALARM: error -999 tcp/ip connection was closed by remote peer; WARNING: error st -5 error return from antenna, see mbus error. Anttena is stuck. Halt the schedule and disk_record=off. Try to reset drives and reboot system through VNC --> timeke for several times. Also try antenna=open and antenna=operate. Affected scans: 029-0606 to 029-0705a (Simin).
-**Hobart 26m**
+**Yarragadee 12m**
-Disk VSN: USN-0102/6000/1024. Data volume at the beginning 0 GB.
-    * 1800 UT - Experiment started OK (Jay).
-    * 0840 UT - Noticed system temperatures had not being recorded since setup so restarted dbbc. First usable scan is 345-0850b (Ross).
-    * At 13:16 UT - received error antenna communication software (antcn) problem. Halt the schedule. Received continuous Alarm: error f1 -1 previous source in this schedule not reached before new source was commanded. Reboot the antenna system . Missed scans 345-1320 till 345-1354 (mas)
-**Yarragadee 12m**
-Disk VSN: USN-0150/4000. Data volume at the beginning 3.654 GB.
-    * 1700 UT - Experiment started OK (Prad).