User Tools

Site Tools


handover:start

This wiki is not maintained! Do not use this when setting up AuScope experiments!

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
Next revision Both sides next revision
handover:start [2018/12/12 20:41]
Tiege McCarthy
handover:start [2019/04/16 19:08]
Jayender Kumar
Line 1: Line 1:
 +====== APSG45 ======
  
-====== RD1810 ======+**Hobart 12m**
  
 +Disk VSN: HOB+1005/​16000/​1024| Data volume at beginning: 6115.369 GB
  
-**Hobart 26m**+   The vacuum pressure is higher than 3.5 (cryogenic) 
 +   SX receiver parameter pres out of range for the last few readings
  
-Disk VSN: USN-0102/​6000/​1024. Data volume at the beginning 0 GB.+**Katherine 12m**
  
-    * 1800 UT - Experiment started OK (Jay)+Disk VSN: MAT+0003/​8000/​1024 | Data volume at beginning: 197.588 GB 
-    * 0840 UT - Noticed system temperatures had not being recorded since setup so restarted dbbc. First usable scan is 345-0850b (Ross). + 
-    At 13:16 UT - received error antenna communication software (antcn) problem. Halt the schedule. Received continuous Alarm: error f1 -1 previous source in this schedule not reached before new source was commanded. Reboot the antenna system . Missed scans 345-1320 till 345-1354 (mas) +   ​
- +
  
 **Yarragadee 12m** **Yarragadee 12m**
  
-Disk VSN: USN-0150/4000. Data volume at the beginning ​3.654 GB.+Disk VSN: HOB+0125/32000/1024 | Data volume at beginning:  3757.29 GB 
 + 
 +   *
  
-    * 1700 UT - Experiment started OK (Prad). 
/home/www/auscope/opswiki/data/pages/handover/start.txt · Last modified: 2021/04/21 13:49 by Jasper Edwards