This wiki is not maintained! Do not use this when setting up AuScope experiments!

Differences

This shows you the differences between two versions of the page.

--- handover:start [2018/12/12 20:41]
Tiege McCarthy
+++ handover:start [2019/08/22 20:23]
Tiege McCarthy
@@ Line 1: / Line 1: @@
+======  ======
+R4908YG
-====== RD1810 ======
+Disk VSN: ...| Data volume at beginning: ... GB
+UT - Experiment may have started OK but not sure due to some mishaps (sorry). (Earl)
-**Hobart 26m**
+Scan: 234-2019   262 0202+319   0 29 NEUTR  20:19:28  20:21:11
-Disk VSN: USN-0102/6000/1024. Data volume at the beginning 0 GB.
+Error with Log Monitor suggested scans prior to this may not have been missed (as thought, probably damaged by my attempts to fix the apparent issue), but I'm am only certain after this (sorry).
-    * 1800 UT - Experiment started OK (Jay).
+:21 Re-syncronisation of mk5 and ddbc via fmset
-    * 0840 UT - Noticed system temperatures had not being recorded since setup so restarted dbbc. First usable scan is 345-0850b (Ross).
-    * At 13:16 UT - received error antenna communication software (antcn) problem. Halt the schedule. Received continuous Alarm: error f1 -1 previous source in this schedule not reached before new source was commanded. Reboot the antenna system . Missed scans 345-1320 till 345-1354 (mas)
-**Yarragadee 12m**
+~~DISCUSSION~~
-Disk VSN: USN-0150/4000. Data volume at the beginning 3.654 GB.
-    * 1700 UT - Experiment started OK (Prad).