User Tools

Site Tools


handover:start

This wiki is not maintained! Do not use this when setting up AuScope experiments!

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
Next revision Both sides next revision
handover:start [2019/01/29 08:29]
Simin Salarpour
handover:start [2019/05/28 17:38]
Jayender Kumar
Line 1: Line 1:
-====== R1879 ======+</​code>​
  
-**Katherine 12m**+Katherine 12m
  
-   * 06:08 UT: ALARM: error st -998 reading systemclock1;​ ALARM: error -999 tcp/ip connection was closed by remote peer; WARNING: error st -5 error return from antenna, see mbus error. Anttena is stuck. Halt the schedule and disk_record=off. Try to reset drives and reboot system through VNC --> timeke for several times. Also try antenna=open and antenna=operate. Affected scans: 029-0606 to 029-0705a (Simin).+Disk VSNTR-00022| Data volume at beginning
  
-**Yarragadee ​12m**+Katherine ​12m
  
 +Disk VSN: TR-00022| Data volume at beginning: 0.0 GB
  
 +    1830 UT - Experiment started okay (Lim).
 +    1911 UT - “Resources temporarily unavailable quikv terminated-Exit code 225”. Not sure what happened, the field system, log, proc were all terminated. The problem had gone unnoticed until alarm gone off at 1929 UT showing no pcfs activities for the last 15 minutes. All scans between 143-1911 and 143-1944b missed (Lim).
 +    22:06 UT problem above happened again. Noticed and solved at 22:15 UT. Might have missed scan 143-2206a, 143-2208 and 143-2213. Tsys has died (Lim).
 +    0310UT - FS crashed. Schedule restarted at 0323UT (Prad).
 +    0345UT - FS crashed. Schedule restarted at 0359UT (Prad).
 +    15:50UT- FS crashed. Schedule restarted at 16.04UT (Momtaz)
  
/home/www/auscope/opswiki/data/pages/handover/start.txt · Last modified: 2021/04/21 13:49 by Jasper Edwards