This wiki is not maintained! Do not use this when setting up AuScope experiments!

Differences

This shows you the differences between two versions of the page.

--- handover:start [2019/01/29 08:32]
Simin Salarpour removed
+++ handover:start [2019/06/13 23:27]
Earl Lester [R4898]
@@ Line 1: / Line 1: @@
-====== R1879 ======
+====== R4898 ======
 **Katherine 12m**
-   * 06:08 UT: ALARM: error st -998 reading systemclock1; ALARM: error -999 tcp/ip connection was closed by remote peer; WARNING: error st -5 error return from antenna, see mbus error. Anttena is stuck. Halt the schedule and disk_record=off. Try to reset drives and reboot system through VNC --> timeke for several times. Also try antenna=open and antenna=operate. Affected scans: 029-0606 to 029-0705a (Simin).
+Disk VSN: | Data volume at beginning:  GB
+   * Experiment started okay. (Earl)
+   * Mk5 required reboot (Xlr session error...)
+   * 2019.164.21:28:30 ALARM: error m5 -900 : no disks available
+   * 23:20 - Rebooted mk5ke (record pointer not incrementing error) [JMc]
+   * 23:24 - Schedule resumed. (JMc)
+   * data between 21:28 and 23:24 dubious.
 **Yarragadee 12m**
+Disk VSN: | Data volume at beginning:  GB
+   * Experiment started okay (Earl)
+   * Mk5 required reboot (Xlr session error...)
+{{tag>}}
+~~DISCUSSION~~