User Tools

Site Tools


handover:start

This wiki is not maintained! Do not use this when setting up AuScope experiments!

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
Next revision Both sides next revision
handover:start [2019/01/29 08:32]
Simin Salarpour removed
handover:start [2019/08/22 22:37]
Tiege McCarthy
Line 1: Line 1:
-====== ​R1879 ======+====== ​ ====== 
 +R4908YG
  
-**Katherine 12m**+Disk VSN: ...| Data volume at beginning: ... GB
  
-   * 06:08 UT: ALARM: error st -998 reading systemclock1;​ ALARM: error -999 tcp/ip connection was closed by remote peer; WARNING: error st -5 error return from antenna, see mbus error. Anttena is stuck. Halt the schedule and disk_record=off. Try to reset drives and reboot system through VNC --> timeke for several timesAlso try antenna=open and antenna=operate. Affected scans: 029-0606 to 029-0705a ​(Simin).+UT - Experiment may have started OK but not sure due to some mishaps (sorry). (Earl)
  
-**Yarragadee 12m**+Scan: 234-2019 ​  262 0202+319 ​  0 29 NEUTR  20:​19:​28 ​ 20:​21:​11 ​  
  
 +Error with Log Monitor suggested scans prior to this may not have been missed (as thought, probably damaged by my attempts to fix the apparent issue), but I'm am only certain after this (sorry).
  
 +20:21 Re-syncronisation of mk5 and ddbc via fmset
 +
 +22:36 Auto-correlation shows issues in channels 12 and 13.
 +
 +~~DISCUSSION~~
  
/home/www/auscope/opswiki/data/pages/handover/start.txt · Last modified: 2021/04/21 13:49 by Jasper Edwards