User Tools

Site Tools


operations:agenda2018_07_26

This wiki is not maintained! Do not use this when setting up AuScope experiments!

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision Both sides next revision
operations:agenda2018_07_26 [2018/07/26 03:21]
Patrick Yates
operations:agenda2018_07_26 [2018/08/09 02:58]
Katie Vandorou
Line 1: Line 1:
-**Chair:​** ​Patrick+**Chair:​** ​Katie
  
-**Attended:​** ​Katie, Ross, Mas, Tiege, Lucas, Jamie, Atifur, Prad+**Attended:​** ​
  
-**Apologies:​** ​Simin+**Apologies:​** ​
  
-**Absent:​** ​Lucia+**Absent:**
  
 **General Issues** **General Issues**
 +    * Yg wind sensor?
 +    * Ke mk5 problems?  ​
  
-  * Sound on ops8 still patchy? 
-      * Maybe volume wheel is playing up - try hitting it 
-  * AUM shifts 
-      * Working on 12m receiver for this 
-      * There will be notes circulated before it starts 
-      * Using flexbuf 
-  * Sunday 19th August - Lucia is doing the shift? 
-      * Make sure calendar is updated 
        
 **Handover Issues** ​ **Handover Issues** ​
  
-  * aov25+  * R4853 
-      * **ho:** Receiver heating up again - seems to be happening regularly?​ +      * **ke:​**  ​ES Oven V Katherine maser fluctuate from blue colour (0.9) to red colour ​(25.8). Brett came to auscope room and had look at this problemWe sent an email the history file of maser KE to Anton and Jamie (mas
-          * Ask whoever is out at telescope to cool it down at the end of the day + 
-          * Fix is replacing cold head, but it is a major job - not happening anytime soon +  
-  * r1852/​aov25/​r1851:​ + 
-      * **ke:** Difference between Mk5/Fs of 1 secondHappened twice - to sync or not to sync? +
-          * If detected after start of experiment, leave it (fairly easy to fix by correlator) +
-          * This is usually caused when ntp time not correct when DIMino started +
-          * Sometimes out by ~0.4 of second, stable, but can't fix with fmset (also due to ntp time)A reboot will usually fix it +
-  * r1852: +
-      * **yg:** mk5cn not responding, JMc rebooted mk5-2yg +
-          * Not sure why, stopped responding in-between scans. Hopefully one-off  +
-      * **yg:** ntupdate not correcting offset after reboot, another reboot fixed it +
-  * r4851: +
-      * **ke:** field system hung after ``disk2file`` command +
-          * reboot fixed it, something went wrong +
-  * r1851: +
-      * **ke:** Autocorrelation spectra were weird. DBBC card died, Mick replaced it. +
-          * Seems to be stable after this - all going well +
-      * **ke:** mk5ke also died (wouldn'​t come back after reboot), but started working after Mick tried a different power cable, and swapped back +
-          * Mysterious +
-          * Jamie is not sure why this might happen+
/home/www/auscope/opswiki/data/pages/operations/agenda2018_07_26.txt · Last modified: 2018/08/09 03:21 by Simin Salarpour