User Tools
operations:documentation.ivs.mark5
This wiki is not maintained! Do not use this when setting up AuScope experiments!
Differences
This shows you the differences between two versions of the page.
| Both sides previous revision Previous revision Next revision | Previous revision Last revision Both sides next revision | ||
|
operations:documentation.ivs.mark5 [2011/07/27 00:40] Jim Lovell [Synchronising the Mark5 Clock] |
operations:documentation.ivs.mark5 [2011/10/26 06:37] 127.0.0.1 external edit |
||
|---|---|---|---|
| Line 56: | Line 56: | ||
| Check the last numbers are the correct date at the start of the scan, duration, the data rate (should be 256 for the 8MHz mode, 128 for the 4 MHz mode) and 0 at the end for no problems. Then plot an autocorrelation from the data: | Check the last numbers are the correct date at the start of the scan, duration, the data rate (should be 256 for the 8MHz mode, 128 for the 4 MHz mode) and 0 at the end for no problems. Then plot an autocorrelation from the data: | ||
| <code>postob</code> | <code>postob</code> | ||
| + | To clear the disk module, ONLY IF YOU'RE CERTAIN there is no data already on the disk! | ||
| + | <code> mk5=protect=off; mk5=reset=erase </code> | ||
| [[operations:monitoring_autocor|Check that the spectra are OK]]. | [[operations:monitoring_autocor|Check that the spectra are OK]]. | ||
| If there are dropped or strange-looking bands, the [[hardware:dbbc.reprogram|DBBC may need reprogramming]]. | If there are dropped or strange-looking bands, the [[hardware:dbbc.reprogram|DBBC may need reprogramming]]. | ||
/home/www/auscope/opswiki/data/pages/operations/documentation.ivs.mark5.txt · Last modified: 2013/02/25 01:16 by Jamie McCallum
Page Tools
