This shows you the differences between two versions of the page.
Both sides previous revision Previous revision | |||
operations:documentation.ivs.mark5 [2011/10/26 06:37] 127.0.0.1 external edit |
operations:documentation.ivs.mark5 [2013/02/25 01:16] Jamie McCallum |
||
---|---|---|---|
Line 10: | Line 10: | ||
Log in to Mark5 you want to set up (either mk5hb, mk5ke or mk5yg) as oper. //Do this from within the pcfs[hb|ke|yg] VNC session so that the Mark5 software will continue to run even if the network link from Hobart to the telescope goes down.// e.g. <code>ssh oper@mk5hb</code> | Log in to Mark5 you want to set up (either mk5hb, mk5ke or mk5yg) as oper. //Do this from within the pcfs[hb|ke|yg] VNC session so that the Mark5 software will continue to run even if the network link from Hobart to the telescope goes down.// e.g. <code>ssh oper@mk5hb</code> | ||
+ | There are two versions of the recording software currently in use. The original software is ''dimino'' which can support modules of up to 8 TB capacity (current used by Hb and Yg) and ''DIMino'' which supports 16 TB modules (in use at Ke). | ||
+ | |||
+ | Hb, Yg: | ||
First check if the dimino program is running: | First check if the dimino program is running: | ||
<code>ps -ef | grep dim</code> | <code>ps -ef | grep dim</code> | ||
If not, start it with | If not, start it with | ||
<code>dimino -m0&</code> | <code>dimino -m0&</code> | ||
+ | |||
+ | Ke: | ||
+ | First check if the DIMino program is running: | ||
+ | <code>ps -ef | grep DIM</code> | ||
+ | If not, start it with | ||
+ | <code>DIMino -m0&</code> | ||
+ | |||
+ | |||
===== Synchronising the Mark5 Clock ===== | ===== Synchronising the Mark5 Clock ===== | ||