User Tools
operations:documentation.ivs.mark5_module_selection
This wiki is not maintained! Do not use this when setting up AuScope experiments!
Differences
This shows you the differences between two versions of the page.
| Both sides previous revision Previous revision | Next revision Both sides next revision | ||
|
operations:documentation.ivs.mark5_module_selection [2016/08/31 04:09] Warren Hankey |
operations:documentation.ivs.mark5_module_selection [2016/08/31 04:10] Warren Hankey |
||
|---|---|---|---|
| Line 7: | Line 7: | ||
| ===== Data requirement ===== | ===== Data requirement ===== | ||
| - | On the AuScope IVS Module Allocation spreadsheet [[operations:log| Operations page]] there should be a data size indicated for the current experiment (2016 module allocation tab); otherwise refer to a similar historical experiment with a data size. On this spreadsheet the station staff also record which module has been provisionally allocated to the experiment and loaded in the Mk5. | + | On the [[operations:log|AuScope IVS Module Allocation spreadsheet]] there should be a data size indicated for the current experiment (2016 module allocation tab); otherwise refer to a similar historical experiment with a data size. On this spreadsheet the station staff also record which module has been provisionally allocated to the experiment and loaded in the Mk5. |
| Also at the end of the printed schedule summary is an estimate of the total amount of data that will be recorded for the experiment. For example, this experiment requires a tad under 1.4 TB: | Also at the end of the printed schedule summary is an estimate of the total amount of data that will be recorded for the experiment. For example, this experiment requires a tad under 1.4 TB: | ||
/home/www/auscope/opswiki/data/pages/operations/documentation.ivs.mark5_module_selection.txt · Last modified: 2019/01/25 00:24 by Warren Hankey
Page Tools
