User Tools
operations:documentation.ivs.mark5_module_selection
This wiki is not maintained! Do not use this when setting up AuScope experiments!
Differences
This shows you the differences between two versions of the page.
| Both sides previous revision Previous revision | Next revision Both sides next revision | ||
|
operations:documentation.ivs.mark5_module_selection [2017/04/20 03:34] Warren Hankey |
operations:documentation.ivs.mark5_module_selection [2017/04/20 03:36] Warren Hankey |
||
|---|---|---|---|
| Line 3: | Line 3: | ||
| A module should be allocated by observatory staff, see the [[operations:log| Module Allocation spreadsheet]] | A module should be allocated by observatory staff, see the [[operations:log| Module Allocation spreadsheet]] | ||
| - | If possible, please try to record an entire experiment onto a single module, most especially R4, CRDS, CRF, and R1 experiments. If it won't fit, please contact observatory staff - they will usually be able to put a module with enough space into the Mark 5. | + | If possible, please try to record an entire experiment onto a single module, most especially R4, CRDS, CRF, and R1 experiments. If it won't fit, please contact observatory staff - they will usually be able to put a module with enough space into the Mark 5. As a rule R1 and R4 on a module by themselves (only at Hobart may they go on a module together) and not mixed with other experiment types. |
| First, check to see how much data will be recorded, then check to see which modules are mounted in the Mark5, then choose one that is big enough. Here's how to do it: | First, check to see how much data will be recorded, then check to see which modules are mounted in the Mark5, then choose one that is big enough. Here's how to do it: | ||
/home/www/auscope/opswiki/data/pages/operations/documentation.ivs.mark5_module_selection.txt · Last modified: 2019/01/25 00:24 by Warren Hankey
Page Tools
