User Tools
operations:documentation.ivs.newstart
This wiki is not maintained! Do not use this when setting up AuScope experiments!
Differences
This shows you the differences between two versions of the page.
|
operations:documentation.ivs.newstart [2011/04/03 16:49] Jim Lovell |
operations:documentation.ivs.newstart [2011/10/26 06:37] |
||
|---|---|---|---|
| Line 1: | Line 1: | ||
| - | ====== Following on with another observation ====== | ||
| - | Sometimes, another IVS observation will follow from the one just finished. In this case, it is a good idea to exit from the field system with a ''terminate'' in the ''oprin'' window. | ||
| - | |||
| - | If a new Mark5 disk module is needed, remove the old one, making sure you label it and put a red sticker over the green dot. Then | ||
| - | * Insert a new module | ||
| - | * [[operations:documentation.DBBCSetupIVS|Configure the DBBC]] (if necessary) | ||
| - | * [[operations:documentation.ivs.mark5|Configure the Mark 5 and make a test recording]] | ||
| - | * [[operations:monitoring_hb|Start the observations]] | ||
/home/www/auscope/opswiki/data/pages/operations/documentation.ivs.newstart.txt · Last modified: 2011/10/26 06:37 (external edit)
Page Tools
