User Tools
operations:pointing
This wiki is not maintained! Do not use this when setting up AuScope experiments!
Differences
This shows you the differences between two versions of the page.
| Both sides previous revision Previous revision Next revision | Previous revision Next revision Both sides next revision | ||
|
operations:pointing [2013/02/13 23:31] Jim Lovell [Obtaining a pointing model with the PCFS] |
operations:pointing [2013/02/20 23:08] Jim Lovell [Version 3.4] |
||
|---|---|---|---|
| Line 47: | Line 47: | ||
| When you are satisfied with the pointing solution: | When you are satisfied with the pointing solution: | ||
| <code> File -> Save </code> | <code> File -> Save </code> | ||
| - | This will save two new files in ''/usr2/log''. The ''xtr'' | + | This will save two new files in ''/usr2/log''. The ''xtr'' file contains the data which can be re-loaded and reduced if necessary. The ''err'' file contains the new model: look for ''new_model'' in the file. |
| + | |||
| + | === Updating the pointing model === | ||
| + | To update the pointing model (which will go into ''/usr2/control/mdlpo.ctl'') use the ''update'' command. If the new model is called err2013.043, type | ||
| + | <code>update 2013.043</code> | ||
| + | Then check the new file to see if it's been updated. | ||
| + | |||
| + | To copy the model into the controller, use HMI | ||
| ==== Obtaining a pointing model with the Power Sensor ==== | ==== Obtaining a pointing model with the Power Sensor ==== | ||
| Line 53: | Line 60: | ||
| ===== Hobart 12m model ===== | ===== Hobart 12m model ===== | ||
| + | ==== Version 4.0 ==== | ||
| + | |||
| + | Taken using PCFS on 2013 day 043/044. Coefficients used during pointing: | ||
| + | |||
| + | <code> | ||
| + | * 0 0 0 0 0 0 0 | ||
| + | * 90.0 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 | ||
| + | * -0.4263 0.0 0.0048 0.0363 -0.0004 | ||
| + | * -0.0026 0.1906 0.0250 0.0 0.0 | ||
| + | * 0.0 0.0 0.0 0.0 0.0 | ||
| + | * 0.0 0.0 0.0 0.0 0.0 | ||
| + | * 0.0 0.0 0.0 0.0 0.0 | ||
| + | * 0.0 0.0 -0.0014 | ||
| + | </code> | ||
| + | |||
| + | Newly derived coefficients: | ||
| + | <code> | ||
| + | 00002 2013 044 23 30 55 0 | ||
| + | 90.0000 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 0 0 0 0 0 0 0 | ||
| + | -0.4380196333 0.0000000000 0.0065650782 0.0334785432 -0.0023106572 | ||
| + | 0.0025938717 0.1538095325 0.0214055236 0.0000000000 0.0000000000 | ||
| + | 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 | ||
| + | 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 | ||
| + | 0.0000000000 0.0000000000 0.0025560106 0.0000000000 0.0000000000 | ||
| + | 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 | ||
| + | </code> | ||
| + | |||
| + | In HMI these are translated to: | ||
| + | |||
| + | ^ Coeff ^ Old model ^ New model ^ | ||
| + | | P1 | -0.0363 | -0.0335 | | ||
| + | | P2 | -0.4263 | -0.4380 | | ||
| + | | P3 | 0.0048 | 0.0066 | | ||
| + | | P4 | -0.0026 | -0.0026 | | ||
| + | | P5 | -0.0004 | -0.0023 | | ||
| + | | P6 | not used || | ||
| + | | P7 | 0.1906 | 0.1538 | | ||
| + | | P8 | 0.0250 | 0.0214 | | ||
| + | | P9 | -0.0014 | 0.00255 | | ||
| + | |||
| + | |||
| ==== Version 3.4 ==== | ==== Version 3.4 ==== | ||
| 30 June 2011\\ | 30 June 2011\\ | ||
| Line 66: | Line 114: | ||
| P8 = 0.0000\\ | P8 = 0.0000\\ | ||
| P9 = 0.0029\\ | P9 = 0.0029\\ | ||
| - | |||
| ==== Version 3.3 ==== | ==== Version 3.3 ==== | ||
| 17 Feb 2011\\ | 17 Feb 2011\\ | ||
/home/www/auscope/opswiki/data/pages/operations/pointing.txt · Last modified: 2017/05/30 07:12 by Jamie McCallum
Page Tools
