This shows you the differences between two versions of the page.
Both sides previous revision Previous revision Next revision | Previous revision Next revision Both sides next revision | ||
operations:pointing [2013/02/14 03:04] Jim Lovell [Obtaining a pointing model with the PCFS] |
operations:pointing [2016/08/23 02:36] Jim Lovell |
||
---|---|---|---|
Line 50: | Line 50: | ||
=== Updating the pointing model === | === Updating the pointing model === | ||
- | To update the pointing model (which will go into ''/usr2/proc/mdl.ctl'') use the ''update'' command. If the new model is called err2013.043, type | + | To update the pointing model (which will go into ''/usr2/control/mdlpo.ctl'') use the ''update'' command. If the new model is called err2013.043, type |
<code>update 2013.043</code> | <code>update 2013.043</code> | ||
Then check the new file to see if it's been updated. | Then check the new file to see if it's been updated. | ||
Line 60: | Line 60: | ||
===== Hobart 12m model ===== | ===== Hobart 12m model ===== | ||
+ | |||
+ | ==== Version 2016.235 ==== | ||
+ | |||
+ | Taken following re-installation of S/X feed and movement of subreflector to original position. | ||
+ | |||
+ | Newly derived coefficients: | ||
+ | <code> | ||
+ | 00007 2016 235 23 14 09 0 | ||
+ | 90.0000 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 0 0 0 0 0 0 0 | ||
+ | -0.4333212972 0.0000000000 0.0158737078 0.0405583084 0.0002418841 | ||
+ | 0.0006486370 0.1193821207 0.0167687163 0.0000000000 0.0000000000 | ||
+ | 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 | ||
+ | 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 | ||
+ | 0.0000000000 0.0000000000 0.0006459429 0.0000000000 0.0000000000 | ||
+ | 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 | ||
+ | </code> | ||
+ | |||
+ | ^ FS Coeff ^ HMI Coef ^ New FS model ^ | ||
+ | | P1 | G2| -0.4333 | | ||
+ | | P3 | G3| 0.0159 | | ||
+ | | P4 | -G1| 0.0406 | | ||
+ | | P5 | G5| 0.0002 | | ||
+ | | P6 | -G4| 0.0006 | | ||
+ | | P7 | G7| 0.1194 | | ||
+ | | P8 | G8| 0.0168 | | ||
+ | | P23 | G9| 0.0006 | | ||
+ | |||
+ | ^HMI Coef | ||
+ | | G1 | -0.0406 | | ||
+ | | G2 | -0.4333 | | ||
+ | | G3 | 0.0159 | | ||
+ | | G4 | -0.0006 | | ||
+ | | G5 | 0.0002 | | ||
+ | | G6 | not used | | ||
+ | | G7 | 0.1194 | | ||
+ | | G8 | 0.0168 | | ||
+ | | G9 | 0.0006 | | ||
+ | |||
+ | Field system and HMI have been updated | ||
+ | |||
+ | ==== Temporary HMI model ==== | ||
+ | This is a temporary model applied in HMI during broadband tests with the Callisto system. | ||
+ | |||
+ | Original model: | ||
+ | <code> | ||
+ | P1 -0.0335 | ||
+ | P2 -0.4380 | ||
+ | P3 0.0066 | ||
+ | P4 -0.0026 | ||
+ | P5 -0.0023 | ||
+ | P6 0 | ||
+ | P7 0.1538 | ||
+ | P8 0.0214 | ||
+ | P9 0.0026 | ||
+ | </code> | ||
+ | |||
+ | Additional offsets are | ||
+ | <code> | ||
+ | Az = +2.7 arcmin = 0.045 deg | ||
+ | El = -4.0 arcmin = -0.0667 deg | ||
+ | </code> | ||
+ | |||
+ | The DC terms in the pointing model are P2 (Az) and P7 (El), so new model is: | ||
+ | <code> | ||
+ | P1 -0.0335 | ||
+ | P2 -0.393 | ||
+ | P3 0.0066 | ||
+ | P4 -0.0026 | ||
+ | P5 -0.0023 | ||
+ | P6 0 | ||
+ | P7 0.08713 | ||
+ | P8 0.0214 | ||
+ | P9 0.0026 | ||
+ | </code> | ||
+ | |||
+ | |||
+ | |||
+ | ==== Version 2016.151 ==== | ||
+ | 2 June 2016 | ||
+ | |||
+ | Observations over 24he. Little change to rms before and after | ||
+ | |||
+ | <code> | ||
+ | Data: | ||
+ | xEl mean -0.0013 | ||
+ | xEl RMS 0.007 | ||
+ | El mean -0.015 | ||
+ | El RMS 0.008 | ||
+ | |||
+ | After solution: | ||
+ | xEl RMS 0.007 | ||
+ | El RMS 0.009 | ||
+ | </code> | ||
+ | |||
+ | Solutions applied err2016.151 | ||
+ | |||
+ | {{:operations:opsmac1.png?200|}} | ||
+ | |||
+ | |||
+ | |||
+ | ==== Version 4.2 ==== | ||
+ | |||
+ | Model updated from observations taken over a few days around 2014/205. Slight dependance on Elevation offset with Azimuth removed. Otherwise looks good. | ||
+ | |||
+ | ==== Version 4.1 ==== | ||
+ | |||
+ | Slight offset in elevation. Model updated from observations on 2013/323 | ||
+ | |||
+ | ==== Version 4.0 ==== | ||
+ | |||
+ | Taken using PCFS on 2013 day 043/044. Coefficients used during pointing: | ||
+ | |||
+ | <code> | ||
+ | * 0 0 0 0 0 0 0 | ||
+ | * 90.0 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 | ||
+ | * -0.4263 0.0 0.0048 0.0363 -0.0004 | ||
+ | * -0.0026 0.1906 0.0250 0.0 0.0 | ||
+ | * 0.0 0.0 0.0 0.0 0.0 | ||
+ | * 0.0 0.0 0.0 0.0 0.0 | ||
+ | * 0.0 0.0 0.0 0.0 0.0 | ||
+ | * 0.0 0.0 -0.0014 | ||
+ | </code> | ||
+ | |||
+ | Newly derived coefficients: | ||
+ | <code> | ||
+ | 00002 2013 044 23 30 55 0 | ||
+ | 90.0000 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 0 0 0 0 0 0 0 | ||
+ | -0.4380196333 0.0000000000 0.0065650782 0.0334785432 -0.0023106572 | ||
+ | 0.0025938717 0.1538095325 0.0214055236 0.0000000000 0.0000000000 | ||
+ | 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 | ||
+ | 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 | ||
+ | 0.0000000000 0.0000000000 0.0025560106 0.0000000000 0.0000000000 | ||
+ | 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 | ||
+ | </code> | ||
+ | |||
+ | In HMI these are translated to: | ||
+ | |||
+ | ^ Coeff ^ Old model ^ New model ^ | ||
+ | | P1 | -0.0363 | -0.0335 | | ||
+ | | P2 | -0.4263 | -0.4380 | | ||
+ | | P3 | 0.0048 | 0.0066 | | ||
+ | | P4 | -0.0026 | -0.0026 | | ||
+ | | P5 | -0.0004 | -0.0023 | | ||
+ | | P6 | not used || | ||
+ | | P7 | 0.1906 | 0.1538 | | ||
+ | | P8 | 0.0250 | 0.0214 | | ||
+ | | P9 | -0.0014 | 0.00255 | | ||
+ | |||
+ | Field system and HMI have been updated | ||
==== Version 3.4 ==== | ==== Version 3.4 ==== | ||
30 June 2011\\ | 30 June 2011\\ | ||
Line 73: | Line 222: | ||
P8 = 0.0000\\ | P8 = 0.0000\\ | ||
P9 = 0.0029\\ | P9 = 0.0029\\ | ||
- | |||
==== Version 3.3 ==== | ==== Version 3.3 ==== | ||
17 Feb 2011\\ | 17 Feb 2011\\ | ||
Line 206: | Line 354: | ||
===== Katherine 12m model ===== | ===== Katherine 12m model ===== | ||
+ | ==== Version 2016.151 ==== | ||
+ | |||
+ | Observations over 24h following recent maser maintenance. Little change to rms before and after | ||
+ | |||
+ | <code> | ||
+ | Data: | ||
+ | xEl mean 0.0027 | ||
+ | xEl RMS 0.007 | ||
+ | El mean -0.0118 | ||
+ | El RMS 0.0118 | ||
+ | |||
+ | After solution: | ||
+ | xEl RMS 0.0126 | ||
+ | El RMS 0.013 | ||
+ | </code> | ||
+ | |||
+ | Solutions applied err2016.151 | ||
+ | |||
+ | {{:operations:ke_pointing_2016_151.png?200|}} | ||
+ | |||
==== Version 1.0 ==== | ==== Version 1.0 ==== | ||
Line 253: | Line 421: | ||
===== Yarragadee 12m model ===== | ===== Yarragadee 12m model ===== | ||
+ | |||
+ | ==== Version 2016.151 ==== | ||
+ | |||
+ | Observations over 24h following recent maser maintenance. Little change to rms before and after | ||
+ | |||
+ | <code> | ||
+ | Data: | ||
+ | xEl mean -0.0006 | ||
+ | xEl RMS 0.011 | ||
+ | El mean 0.015 | ||
+ | El RMS 0.008 | ||
+ | |||
+ | After solution: | ||
+ | xEl RMS 0.012 | ||
+ | El RMS 0.010 | ||
+ | </code> | ||
+ | |||
+ | Solutions applied err2016.151 | ||
+ | |||
+ | {{:operations:yg_pointing_2016_151.png?200|}} | ||
+ | |||
+ | This solution was put into HMI on 22 June 2016, ~23:45 UT (day 174). Parameters are: | ||
+ | |||
+ | <code> | ||
+ | G1 -0.0105 | ||
+ | G2 -0.0070 | ||
+ | G3 0.0180 | ||
+ | G4 0.0094 | ||
+ | G5 -0.0024 | ||
+ | G7 0.2059 | ||
+ | G8 0.0158 | ||
+ | G9 0.0007 | ||
+ | </code> | ||
+ | |||
+ | Note that these were initially put in to HMI on June 20 but the sign for G4 was wrong. Not sure if that had a significant impact or not. | ||
+ | |||
+ | Also updated HMI (on day 175, 00 UT) with revised station coordinates. Only sig change was to elevation which was 50m too low. | ||
+ | |||
+ | <code> | ||
+ | Lat, Long, Elevation: | ||
+ | Before: -29.0465, 115.3467, 200.0 | ||
+ | After: -29.0469, 115.3465, 250.48 | ||
+ | </code> | ||
+ | |||
+ | |||
+ | |||
==== Version 1.5 ==== | ==== Version 1.5 ==== | ||