This shows you the differences between two versions of the page.
Both sides previous revision Previous revision | Next revision Both sides next revision | ||
software:openmonica [2011/10/26 06:37] 127.0.0.1 external edit |
software:openmonica [2012/01/25 01:42] Jamie McCallum |
||
---|---|---|---|
Line 21: | Line 21: | ||
At Hobart, MoniCA also connects to the MET3 sensor in the same way as the field system, and the site temperature, pressure and humidity comes from that sensor. | At Hobart, MoniCA also connects to the MET3 sensor in the same way as the field system, and the site temperature, pressure and humidity comes from that sensor. | ||
+ | **Updating monitor points** | ||
+ | If the response from a monitor point changes (e.g, if additional variables are returned) Monica will ignore these until it is recompiled with the correct monitor-points.txt settings. For the servers (pcfshb, etc), the relevant file is ''/usr2/AuscopeUtils/monitoring/openMonica2/config/monitor-points.txt''. The format of the lines is fairly clear (described in detail [[http://code.google.com/p/open-monica/wiki/MonitorPointsFileFormat|here]]). For additional returned variables, use the current configuration as a guide. Once the ''monitor-points.txt'' file is correct, run the follwing commands to generate a new open-monica.jar file | ||
+ | ''/etc/init.d/Monica.monica stop''\\ | ||
+ | ''cd /usr2/AuscopeUtils/monitoring/openMonica2/''\\ | ||
+ | ''ant'' | ||
+ | If there are no reported errors, restart the monica server with ''/etc/init.d/Monica.monica start''. From here on, the new variables will be logged into the Monica database. | ||
+ | |||
+ | To be able to monitor the new variables, you will also need to edit the monitor points on ops-serv2. The relevant file on ops-serv2 is ''/usr2/AuscopeUtils/monitoring/oMonica/config.pcfshb/monitor-points.txt''. Stop any processes using open-monica.jar & rebuild it with | ||
+ | |||
+ | ''cd /usr2/AuscopeUtils/monitoring/oMonica/''\\ | ||
+ | ''ant'' | ||
+ | |||
+ | It should rebuild 4 jar files and exit cleanly. Start the Monica client & check that you can monitor the new variables. | ||
====== Below this line is the old information ====== | ====== Below this line is the old information ====== | ||