This wiki is not maintained! Do not use this when setting up AuScope experiments!

Differences

This shows you the differences between two versions of the page.

--- handover:a1516 [2015/06/03 01:08]
Jim Lovell
+++ handover:a1516 [2015/06/03 14:45] (current)
liza
@@ Line 1: / Line 1: @@
 ====== A1516 ======
+<note important>**Achtung! R1 TRANSFER IN PROGRESS! MONITORING REQUIRED!**</note>
+R1 monitoring instructions: [[operations:monitoring.ivs.etransfer|operations:monitoring.ivs.etransfer]]
 **Hobart 12m:**
@@ Line 7: / Line 12: @@
 Data volume at beginning: 18158.799 GB
-       * I have been restarting rxmon everytime it has an error and the disc pos deficit is still increasing, currently ~60 GB. (Ellen)
+       * 01:04 UT - I have been restarting rxmon everytime it has an error and the disc pos deficit is still increasing, currently ~60 GB. (Ellen)
+       * 03:03 UT - Disc pos ~80 GB behind. (Ellen)
+       * 05:52 UT - Disc pos ~110 GB behind. (Ellen)
+       * 12:40 UT - Disc pos ~150 GB behind. (Dave)
@@ Line 24: / Line 32: @@
       * 00:43 UT - During scans 154-0043 and 0044 got the following errors: WARNING: error an -103 pointing computer tracking errors are too large ;  WARNING: error qo -301 warning: onsource status is slewing! Scans probably bad. (Ellen)
+      * Tsys bands 13, 14 consistently quite high. (Ellen)
+      * 0919 UT - S-band IF attenuators were at 10 db and AGC in ifc was overflowing. Ran ifnom to increase attenuation to 15 db in S band. (Dave)
 {{tag>}}