This wiki is not maintained! Do not use this when setting up AuScope experiments!

Differences

This shows you the differences between two versions of the page.

--- handover:aov004_and_rd1507 [2015/08/27 02:09]
Imogen Jones
+++ handover:aov004_and_rd1507 [2015/08/27 10:13] (current)
David Horsley
@@ Line 17: / Line 17: @@
   * 00:45 UT: alarm through DBBC has changed in last digit. Might cause one of these small cklock jumps. (Lucia)
-  * 02:07 UT: dbbc kept drifting. Schedule halted, dbbc reset, fs restarted. First good scan 239-0210. (Lucia)
+  * 02:07 UT: dbbc kept drifting. Schedule halted, dbbc reset, fs restarted. First good scan 239-0210. Missed 90 GB. (Lucia)
+  * 09:57 UT: ALARM: Delay through DBBC has changed. Monitor for stability and reset DBBC if it drifts. Delay is not stable, dbbc keeps drifting, schedule halted and dbbc reset. Missed scans 239-0957 and 239-1007 (Ross).
@@ Line 27: / Line 28: @@
 Data volume at beginning: 0 GB
-  * ntpq has highly unstable offset in fifth row ranging between -13 and -22 ms. First two are stable, and third and fourth are consistently less than 10 ms (Ross).
+  * SETUP: ntpq has highly unstable offset in fifth row ranging between -13 and -22 ms. First two are stable, and third and fourth are consistently less than 10 ms (Ross).
-  * Cannot record to HART+101 module in Bank A. Module HOB+0083 in bank B can successfully be recorded to (Ross).
+  * SETUP: Cannot record to HART+101 module in Bank A. Module HOB+0083 in bank B can successfully be recorded to (Ross).
 {{tag>}}
@@ Line 34: / Line 35: @@
 ~~DISCUSSION~~