This wiki is not maintained! Do not use this when setting up AuScope experiments!

Differences

This shows you the differences between two versions of the page.

--- handover:aum018 [2020/08/19 12:41]
Patrick Yates
+++ handover:aum018 [2020/08/20 04:32] (current)
Lim Chin Chuan
@@ Line 1: / Line 1: @@
 ====== AUM018 ======
+** Hobart 12m **
+flexbuff
+  * 1730UT - Experiment started ok (Patrick).
+  * 2350UT - Halted, wrong prc setup. (Lim)
+  * 0024UT - First scan with correct datastream: 233-0024 (Lim)
+  * 0300UT - fs crashes: Affected scans: 233-0301 to 233-0400 (Simin)
+** Yarragadee 12m **
+flexbuff
+  * 1730UT - Experiment started ok (Patrick).
+  * 2157UT - Clock jump (Patrick).
+** Katherine 12m **
+flexbuff
+  * Running ''aum.setup.py'' configured ''dbbc3ke'' okay, but failed with ''fila10g/ERROR'' when trying to configure ''dbbcke''. Fixed by restarting the control software (''v106E_120118'') on ''dbbcke''.
+  * 1730UT - Experiment started ok (Patrick).
+  * 2140UT - Antenna stuck, fixed with ''antenna=open'' and ''antenna=operate''. Affected scans: 232-1833 to 232-2142 (Patrick).
+  * 0015UT - It seems that only xx pol recorded so far, restarted jive5ab and recording xx and xy datastream now. (Lim)
+  * 0048UT - scans with 3 datastreams 233-0033 to 233-0048 (Lim).
+  * 0059UT - Fila10G failed again? s band not recorded again. (Lim)
+  * 0123UT - Unsolvable dbbc2 problem. For most scans, only the x band data recorded (Lim)