User Tools

Site Tools


handover:crf93

This wiki is not maintained! Do not use this when setting up AuScope experiments!

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
handover:crf93 [2016/02/25 14:46]
Jonathan Rogers
handover:crf93 [2016/02/25 18:00] (current)
Jonathan Rogers
Line 14: Line 14:
   * 13:08 UT Wind was consistently bad (>​40km/​hr) halted the schedule. (AK)   * 13:08 UT Wind was consistently bad (>​40km/​hr) halted the schedule. (AK)
   * 13:18 UT Stopped recording. Realised I should have probably should have entered "​disk_record =off" after it stowed the first time. Log monitor still says recording (bug?) though disk_pos has not changed. (AK)   * 13:18 UT Stopped recording. Realised I should have probably should have entered "​disk_record =off" after it stowed the first time. Log monitor still says recording (bug?) though disk_pos has not changed. (AK)
-Hobart 12m: 
   * 14:21 UT restarted the schedule once the wind had died down and the live page said "​wind_ok"​. Scans affected 056-1231 through to  056-1415. (AK)   * 14:21 UT restarted the schedule once the wind had died down and the live page said "​wind_ok"​. Scans affected 056-1231 through to  056-1415. (AK)
 +  * 15:38 UT Antenna stowed due to high winds. (AK)
 +  * 16:15 UT Schedule halted, winds were still >42 km/hr
 +  * 17:58 UT Antenna remained stowed due to winds. The wind temporarily dipped below 30 km/hr tried running "​schedule=crf93"​ but no luck. Missed all scans  056-1538 onwards. (AK)
 +
 +
 +Hobart 12m:
 +  ​
  
 Disk VSN: HOB+0042 Disk VSN: HOB+0042
Line 37: Line 43:
   * 12:28UT Automatic wind stow activated. ​ (AK)   * 12:28UT Automatic wind stow activated. ​ (AK)
   * 12:34UT Auto-stow released. Scan affected ​ 056-1224 and 056-1231. (AK)   * 12:34UT Auto-stow released. Scan affected ​ 056-1224 and 056-1231. (AK)
 +  * 12:37UT mk5=mode? returns ​ 0x55555555 : 2 : 2 ;  which is not consistent for a crf experiment. Did a search for previous outputs of mk5=mode? and they were all displaying ​ 0x55555555 : 2 : 2. According to wiki crf experiments should be  0x55555555 : 4 : 2. Not sure if this is of concern? ​  (AK)
   * 13:25UT Automatic wind stow. (AK)   * 13:25UT Automatic wind stow. (AK)
   * 13:30UT Antenna failed to recover from stow, winds were still high. (AK)   * 13:30UT Antenna failed to recover from stow, winds were still high. (AK)
-  * 13:57UT winds slowed, **antenna manually recovered** as per wiki's guidelines. Scans affected 056-1327-056-1351 (AK)+  * 13:57UT winds slowed, **antenna manually recovered** as per wiki's guidelines. Scans affected 056-1327 ​through to 056-1351 (AK) 
 +  * 15:37UT Auto wind stop activated(?​) acc to e remote control but no warning in logmonitor 
 +  * 15:53UT Auto-stow released. Scans affected 056-1538 and 056-1546. (AK) 
 +  * 15:58UT ALARM Automatic wind stow activated (AK) 
 +  * 16:04UT Auto-stow released. Scans affected ​ 056-1553 and  056-1600 (AK) 
 +  * 16:31UT ALARM Automatic wind stow activated (AK) 
 +  * 16:37UT Auto-stow released. Scans affected ​ 056-1631 (AK) 
 +  * 16:58UT ALARM Automatic wind stow activated (AK) 
 +  * 17:05UT Auto-stow released
  
  
Line 50: Line 65:
   * Problems with the Hardware clock on PCFS. PCFS needs restarting again (Bryn)   * Problems with the Hardware clock on PCFS. PCFS needs restarting again (Bryn)
   * PCFS running after reboot. Data good from scan 056-0126 onward ​ --- //[[Jim Lovell]] 2016/02/25 03:34//   * PCFS running after reboot. Data good from scan 056-0126 onward ​ --- //[[Jim Lovell]] 2016/02/25 03:34//
 +  * 12:37UT mk5=mode? returns ​ 0x55555555 : 2 : 2 ;  which is not consistent for a crf experiment. Did a search for previous outputs of mk5=mode? and they were all displaying ​ 0x55555555 : 2 : 2. According to wiki crf experiments should be  0x55555555 : 4 : 2. Not sure if this is of concern? ​  (AK)
  
 Yarragadee 12m: Yarragadee 12m:
Line 58: Line 74:
  
   * 1814 UT Experiment started - delays due to problems with Ke  (Bryn)   * 1814 UT Experiment started - delays due to problems with Ke  (Bryn)
 +  * 12:37UT mk5=mode? returns ​ 0x55555555 : 2 : 2 ;  which is not consistent for a crf experiment. Did a search for previous outputs of mk5=mode? and they were all displaying ​ 0x55555555 : 2 : 2. According to wiki crf experiments should be  0x55555555 : 4 : 2. Not sure if this is of concern? ​  (AK)
/home/www/auscope/opswiki/data/attic/handover/crf93.1456411579.txt.gz · Last modified: 2016/02/25 14:46 by Jonathan Rogers