User Tools

Site Tools


handover:crf93

This wiki is not maintained! Do not use this when setting up AuScope experiments!

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
handover:crf93 [2016/02/25 16:43]
Jonathan Rogers
handover:crf93 [2016/02/25 18:00] (current)
Jonathan Rogers
Line 17: Line 17:
   * 15:38 UT Antenna stowed due to high winds. (AK)   * 15:38 UT Antenna stowed due to high winds. (AK)
   * 16:15 UT Schedule halted, winds were still >42 km/hr   * 16:15 UT Schedule halted, winds were still >42 km/hr
 +  * 17:58 UT Antenna remained stowed due to winds. The wind temporarily dipped below 30 km/hr tried running "​schedule=crf93"​ but no luck. Missed all scans  056-1538 onwards. (AK)
  
  
Line 42: Line 43:
   * 12:28UT Automatic wind stow activated. ​ (AK)   * 12:28UT Automatic wind stow activated. ​ (AK)
   * 12:34UT Auto-stow released. Scan affected ​ 056-1224 and 056-1231. (AK)   * 12:34UT Auto-stow released. Scan affected ​ 056-1224 and 056-1231. (AK)
 +  * 12:37UT mk5=mode? returns ​ 0x55555555 : 2 : 2 ;  which is not consistent for a crf experiment. Did a search for previous outputs of mk5=mode? and they were all displaying ​ 0x55555555 : 2 : 2. According to wiki crf experiments should be  0x55555555 : 4 : 2. Not sure if this is of concern? ​  (AK)
   * 13:25UT Automatic wind stow. (AK)   * 13:25UT Automatic wind stow. (AK)
   * 13:30UT Antenna failed to recover from stow, winds were still high. (AK)   * 13:30UT Antenna failed to recover from stow, winds were still high. (AK)
-  * 13:57UT winds slowed, **antenna manually recovered** as per wiki's guidelines. Scans affected 056-1327-056-1351 (AK)+  * 13:57UT winds slowed, **antenna manually recovered** as per wiki's guidelines. Scans affected 056-1327 ​through to 056-1351 (AK)
   * 15:37UT Auto wind stop activated(?​) acc to e remote control but no warning in logmonitor   * 15:37UT Auto wind stop activated(?​) acc to e remote control but no warning in logmonitor
   * 15:53UT Auto-stow released. Scans affected 056-1538 and 056-1546. (AK)   * 15:53UT Auto-stow released. Scans affected 056-1538 and 056-1546. (AK)
Line 51: Line 53:
   * 16:31UT ALARM Automatic wind stow activated (AK)   * 16:31UT ALARM Automatic wind stow activated (AK)
   * 16:37UT Auto-stow released. Scans affected ​ 056-1631 (AK)   * 16:37UT Auto-stow released. Scans affected ​ 056-1631 (AK)
 +  * 16:58UT ALARM Automatic wind stow activated (AK)
 +  * 17:05UT Auto-stow released
  
  
Line 61: Line 65:
   * Problems with the Hardware clock on PCFS. PCFS needs restarting again (Bryn)   * Problems with the Hardware clock on PCFS. PCFS needs restarting again (Bryn)
   * PCFS running after reboot. Data good from scan 056-0126 onward ​ --- //[[Jim Lovell]] 2016/02/25 03:34//   * PCFS running after reboot. Data good from scan 056-0126 onward ​ --- //[[Jim Lovell]] 2016/02/25 03:34//
 +  * 12:37UT mk5=mode? returns ​ 0x55555555 : 2 : 2 ;  which is not consistent for a crf experiment. Did a search for previous outputs of mk5=mode? and they were all displaying ​ 0x55555555 : 2 : 2. According to wiki crf experiments should be  0x55555555 : 4 : 2. Not sure if this is of concern? ​  (AK)
  
 Yarragadee 12m: Yarragadee 12m:
Line 69: Line 74:
  
   * 1814 UT Experiment started - delays due to problems with Ke  (Bryn)   * 1814 UT Experiment started - delays due to problems with Ke  (Bryn)
 +  * 12:37UT mk5=mode? returns ​ 0x55555555 : 2 : 2 ;  which is not consistent for a crf experiment. Did a search for previous outputs of mk5=mode? and they were all displaying ​ 0x55555555 : 2 : 2. According to wiki crf experiments should be  0x55555555 : 4 : 2. Not sure if this is of concern? ​  (AK)
/home/www/auscope/opswiki/data/attic/handover/crf93.1456418613.txt.gz · Last modified: 2016/02/25 16:43 by Jonathan Rogers