This wiki is not maintained! Do not use this when setting up AuScope experiments!

Differences

This shows you the differences between two versions of the page.

--- handover:ohig106 [2017/02/14 05:38]
Warren Hankey
+++ handover:ohig106 [2017/02/15 09:39] (current)
Ross Turner
@@ Line 1: / Line 1: @@
 ====== ohig106 ======
+ = Experiment Name =
+Hobart 12m:
+Disk VSN: HOB+0029
+Data volume at beginning:0
+  * 17:30UT Exp started OK, need to check with on-call re ifc and ifd power levels. Levels seem to be okay once the exp started (Arwin)
+  * 0050 UT Drives got stuck, error messages about computer acu time difference exceeding 0.25 seconds and ramp epoch time not -1. Tried resetting drives in HMI - drives unresponsive. (Bryn)
+  * 0110 UT Drives back online - error with clock on HMI - reboot central fixed the issue. First good scan 046-0126 (Bryn)
+  * 0527 UT Wind stow released at 0541 (Bryn)
+  * 0607 UT Wind stow activated, released at 0613 UT (Tiege)
+  * 0743 UT Wind stow activated, released at 0748 UT (Tiege)
+  * 0750 UT Wind stow activated, released at 0820 UT (Tiege)
+  * 0918 UT Wind stow activated, released at 0923 UT (Tiege)
+Katherine 12m:
+Disk VSN: A disk other than BKG-142  (Had to be BKG-142 in the end, discussed with Warren, will need another disk for ohg107)
+Data volume at beginning:2026.517
+* 17:30UT Exp started OK. (Arwin)
+Yarragadee 12m:
+Disk VSN: HAY-0144
+Data volume at beginning: 0
+* 17:30UT Exp started OK. (Arwin)