This wiki is not maintained! Do not use this when setting up AuScope experiments!

Differences

This shows you the differences between two versions of the page.

--- handover:ohig94 [2015/02/04 18:12]
Lucia McCallum
+++ handover:ohig94 [2015/02/05 13:08] (current)
Lucia McCallum
@@ Line 5: / Line 5: @@
   * 18:00 UT - Experiment started OK
+  * Around 05:50 restarted rfpic by mistake (with Yg) (Liza)
 **Ke**
@@ Line 10: / Line 11: @@
   * 18:00 UT - Experiment started at around 18:03 UT due to antenna checking procedure for a1501ke. Around 3 minutes lost on scan 035-1800a. First full scan is on 035-1811.
+  * 21:54 UT - disk_pos ~10 GB short. This seems to be consistent with having missed the first scan after all.
 **Yg**
 OAN+0006 0GB (4TB)
-  * 18:00 UT - Experiment started OK
+  * 18:00 UT - Experiment started OK. sband tsys troublesome as usual.
+  * Scan 036-0535b may be bad due to antenna stuck at the azimuth limit (Liza)
+  * around 05:50 UT - restarted rfpic twice (once by mistake) (Liza)
+  * 08:44UT: scan 0119+115 antenna waiting at limit (Lucia)
+  * 12:05UT: The log monitor completely froze (this was when the last line was displayed). It didn't register an entry for almost an hour before I notice because it didn't set any alarms off. It wouldn't except any commands and I couldn't even close it. So I just open another instance at 13:02UT and dragged the other one off to the side... (Ellen)
 {{tag>}}
 ~~DISCUSSION~~