This wiki is not maintained! Do not use this when setting up AuScope experiments!

Differences

This shows you the differences between two versions of the page.

--- handover:r1699 [2015/08/04 22:35]
David Horsley
+++ handover:r1699 [2015/08/05 14:27] (current)
David Horsley
@@ Line 1: / Line 1: @@
 ====== R1699 ======
+**Note to observers:** Aircon in Auscope control room appears to be out of water or something. If you turn it on, it smells bad and doesn't really heat up the room.
 **Hobart 26m**
@@ Line 8: / Line 10: @@
   * Exp started OK.
+  * He supply press ~275 psi. Informing Brett.
+  * 5:15UTC - He was supplied, bringing pressure from 265 to 300 psi (Liza).
+  * Signs of RFI in channels S5, S6 (overflow) pretty much all the time (Liza)
+  * Racbus lost connection with newsmerd 2 times, the pcal control had to be returned to fs manually (calu...) Caused overflow of all VCs (Liza)
+  * 11:45 He supply pressure ~278 psi.  Dropping at this rate it should be below 275 psi in about an hour or two. Liza will contact Brett and he will make decision (Anita)
+  * A little after 14:00 UT Brett re-filled the He-supply, now is about 298 psi. (Ellen)
 **Katherine**
@@ Line 15: / Line 23: @@
 Start Pos: 0 GB
-  * Exp started OK.
+  * Exp started OK
+  * High Tsys in channels S1-S4 pretty much all the time (120-170K) (Liza)
@@ Line 25: / Line 34: @@
   * Exp started OK.
-  *
+  * Monica restarted twice due to ifpic problem (Liza)
+  * Monica also restarted twice due to ifpic problem - does not seem to be fixing it (Anita)
 {{tag>}}
 ~~DISCUSSION~~