This wiki is not maintained! Do not use this when setting up AuScope experiments!

Differences

This shows you the differences between two versions of the page.

--- handover:r1782 [2017/03/06 06:12]
Warren Hankey
+++ handover:r1782 [2017/03/07 15:01] (current)
Bryn Emptage
@@ Line 1: / Line 1: @@
-====== r1782 ======
+======R1782======
+**Hobart 12m:**
-{{tag>}}
+Disk VSN: HART+101/8000 *do not erase existing data on disk*. Okay (Lucas).
+Data volume at beginning: 4861 GB will have to change module then as there is 4051 GB needed.
+    * Experiment started okay (Lucas).
+    * Hobart autocorrelations don't look right, maybe rfi? (Lucas)
+**Katherine 12m:**
+Disk VSN: HOB+0021
+Data volume at beginning: 2.244 GB
+  * Experiment missed scans 065-1700 and 065-1704 as dbbc was reconfigured. After that it was fine. Nothing serious just timing was off and wouldn't sync (Lucas).
+  *
+**Yarragadee 12m:**
+Disk VSN: USN-0067
+Data volume at beginning: 59.080 GB
+    * Experiment started fine (Lucas).
+    * Lost ability to read tsys again before 0600 UT - IF levels and autocorrelations are fine though (Bryn)
+    * 14:30UT Saw a transient step function on the autocorrelation spectra. It disappeared the next scan. This coupled with the non-existat sys temps has forced me to reconfigure the DBBC. Scans missed will be 066-1454, 066-1456, 066-1502, and 066-1504a.(Arwin)
+    * I checked with the yg staff, Jim is aware of the tsys problem and exp is okay to go ahead without meaningful system temps. (Arwin)
-~~DISCUSSION~~