User Tools

Site Tools


handover:r1795

This wiki is not maintained! Do not use this when setting up AuScope experiments!

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Next revision
Previous revision
handover:r1795 [2017/06/06 16:50]
Tiege McCarthy
handover:r1795 [2017/06/07 13:14] (current)
Tiege McCarthy
Line 1: Line 1:
 ====== R1795 ====== ====== R1795 ======
 +
 +**Note to Jesse: Ho is set up, Hb is not observing next experiment (contradictory to calendar)**
 +
  
 **Hobart 12m** **Hobart 12m**
Line 5: Line 8:
 Module: UVLBI-06/ Start Position: 0.224 GBs Module: UVLBI-06/ Start Position: 0.224 GBs
     * 17:00 - Experiment started OK (Tiege).     * 17:00 - Experiment started OK (Tiege).
 +    * 01:00 - rfpic error message switched off. (Lucia)
 +    * 01:30 - we entered the antenna to see the cable wrap. possible brief power interruption,​ though unlikely. (Lucia)
  
 **Katherine 12m** **Katherine 12m**
Line 10: Line 15:
 Module: HOB+0047/ Start Position: 0.256 GBs Module: HOB+0047/ Start Position: 0.256 GBs
     * 17:00 - Experiment started OK (Tiege).     * 17:00 - Experiment started OK (Tiege).
 +    * 07:15 UT - Maser status unknown, maser computer is no longer connecting to the network (known issue), possibly (according to Jamie) connecting intermittently. Have not been able to connect my entire shift. (Ellen)
  
  
Line 16: Line 22:
 Module: MET-0001/ Start Position: 0.417 GBs Module: MET-0001/ Start Position: 0.417 GBs
     * 17:00 - Experiment started OK (Tiege).     * 17:00 - Experiment started OK (Tiege).
 +    * 07:15 UT - S-band (channels 09-14) have been high for most of the time (until now at 13:13UT) but occasionally return to normalish levels. No storm or any other obvious explanation. (Ellen)
  
  
/home/www/auscope/opswiki/data/attic/handover/r1795.1496767817.txt.gz · Last modified: 2017/06/06 16:50 by Tiege McCarthy