This wiki is not maintained! Do not use this when setting up AuScope experiments!

Differences

This shows you the differences between two versions of the page.

--- handover:r4763 [2016/10/27 17:49]
Bryn Emptage
+++ handover:r4763 [2016/10/28 21:46] (current)
Lucas Hyland
@@ Line 1: / Line 1: @@
 ====== r4763 ======
+**GENERAL ISSUES**
+**Watchdog timeout alarm isn't sounding for hb. OR any of the other stations ke yg**
+No alarm for WARNING: error st  -10 rampepochtime not -1 when preparing to load, check antenna is in "operate".
+No alarm for WARNING: error st   -8 power on timed-out.
+No met data onwards from 2015_10_20? Have to wait until data is up before yg logs can be done.
 **Hobart 12m**
+Disk VSN: HOB+0129
+Data Volume at beginning: 0.3GB
+  * 18:30 UT Experiment started OK (Bryn)
 **Katherine 12m**
+Disk VSN: BKG-0036
+Data Volume at beginning: 0.3GB
+  * 18:30 UT Experiment started OK (Bryn)
 **Yarragadee 12m**
@@ Line 11: / Line 30: @@
 Disk VSN: BKG-0064
-Data Volume at beginning:
+Data Volume at beginning: 0.3GB
+  * 17:40 UT Error st -8 power on timed-out when trying to turn on drives. Tried antenna=open and antenna=operate, drives still stuck. Resetting in HMI did nothing. (Bryn)
+  * 18:20 UT Drive error resolved - someone (a mob of kangaroos were seen near the pedestal switch) had activated the emergency stop button on the telescope - required manual disengage on site. (Bryn)
+  * 18:30 UT Experiment started OK (Bryn)
-  * 15:48 UT Error st -8 power on timed-out when trying to turn on drives. Tried antenna=open and antenna=operate, drives still stuck. Resetting in HMI did nothing. (Bryn)
 {{tag>}}