This wiki is not maintained! Do not use this when setting up AuScope experiments!

Differences

This shows you the differences between two versions of the page.

--- handover:r4763 [2016/10/27 18:42]
Bryn Emptage
+++ handover:r4763 [2016/10/28 21:46] (current)
Lucas Hyland
@@ Line 2: / Line 2: @@
 **GENERAL ISSUES**
-**Watchdog timeout alarm isn't sounding for hb.**
+**Watchdog timeout alarm isn't sounding for hb. OR any of the other stations ke yg**
 No alarm for WARNING: error st  -10 rampepochtime not -1 when preparing to load, check antenna is in "operate".
 No alarm for WARNING: error st   -8 power on timed-out.
+No met data onwards from 2015_10_20? Have to wait until data is up before yg logs can be done.
 **Hobart 12m**
@@ Line 31: / Line 33: @@
   * 17:40 UT Error st -8 power on timed-out when trying to turn on drives. Tried antenna=open and antenna=operate, drives still stuck. Resetting in HMI did nothing. (Bryn)
-  * 18:20 UT fixed error with drives - someone had activated the emergency stop button on the telescope - required manual disengage. (Bryn)
+  * 18:20 UT Drive error resolved - someone (a mob of kangaroos were seen near the pedestal switch) had activated the emergency stop button on the telescope - required manual disengage on site. (Bryn)
   * 18:30 UT Experiment started OK (Bryn)