User Tools
network
This wiki is not maintained! Do not use this when setting up AuScope experiments!
Differences
This shows you the differences between two versions of the page.
| Both sides previous revision Previous revision Next revision | Previous revision | ||
|
network [2019/09/03 05:18] Guifre |
network [2019/09/09 06:24] (current) Guifre |
||
|---|---|---|---|
| Line 1: | Line 1: | ||
| - | = Network connection = | + | ====== Network connection ====== |
| + | === IPs === | ||
| | Orig | IP | Dest | Usage | | | Orig | IP | Dest | Usage | | ||
| Line 9: | Line 10: | ||
| | FlexBuff | 192.168.1.11 | DBBC 3 | IF E | | | FlexBuff | 192.168.1.11 | DBBC 3 | IF E | | ||
| | FlexBuff | 192.168.1.12 | DBBC 3 | IF F | | | FlexBuff | 192.168.1.12 | DBBC 3 | IF F | | ||
| - | | FlexBuff | 192.168.1.13 | [Reserved] | Network | | + | | FlexBuff | 192.168.1.13 | DBBC 2 | S-band | |
| - | | FlexBuff | 192.168.1.14 | DBBC 2 | S-band | | + | | FlexBuff | 192.168.1.14 | [Reserved] | Network | |
| - | | dBBC3 . | 192.168.1.15 | FlexBuff | IF A | | + | | dBBC3 | 192.168.1.15 | FlexBuff:46227 | IF A | |
| - | | dBBC3 . | 192.168.1.16 | FlexBuff | IF B | | + | | dBBC3 | 192.168.1.16 | FlexBuff:46228 | IF B | |
| - | | dBBC3 . | 192.168.1.17 | FlexBuff | IF C | | + | | dBBC3 | 192.168.1.17 | FlexBuff:46229 | IF C | |
| - | | dBBC3 . | 192.168.1.18 | FlexBuff | IF D | | + | | dBBC3 | 192.168.1.18 | FlexBuff:46230 | IF D | |
| - | | dBBC3 . | 192.168.1.19 | FlexBuff | IF E | | + | | dBBC3 | 192.168.1.19 | FlexBuff:46231 | IF E | |
| - | | dBBC3 . | 192.168.1.20 | FlexBuff | IF F | | + | | dBBC3 | 192.168.1.20 | FlexBuff:46232 | IF F | |
| - | | dBBC2 . | 192.168.1.21 | FlexBuff | S-band | | + | | dBBC2 | 192.168.1.21 | FlexBuff | S-band | |
| - | | dBBC2 . | 192.168.1.22 | FlexBuff | S-band | | + | | dBBC2 | 192.168.1.22 | ? | ? | |
| === FlexBuff === | === FlexBuff === | ||
| Line 31: | Line 31: | ||
| - | === dBBC3 . === | + | === dBBC3 === |
| Networks settings in the dbbc3 can be defined in the fila10g config file: | Networks settings in the dbbc3 can be defined in the fila10g config file: | ||
| Line 38: | Line 38: | ||
| or in the python configuration script: | or in the python configuration script: | ||
| - | + | ||
| - | > # Initialise the VDIF header | + | |
| > # default values (core3h=1,ip_dest=7,net_port=46227) | > # default values (core3h=1,ip_dest=7,net_port=46227) | ||
| > dbbcComms(sd,'core3h={},destination 0 192.168.1.{}:{}'.format(core3h,ip_dest,net_port)) | > dbbcComms(sd,'core3h={},destination 0 192.168.1.{}:{}'.format(core3h,ip_dest,net_port)) | ||
| - | === dBBC2 . === | + | === dBBC2 === |
| In the fila10G configuration file (for example: configure_fila10g.aum.sh) | In the fila10G configuration file (for example: configure_fila10g.aum.sh) | ||
| Line 49: | Line 48: | ||
| > echo "tengbcfg eth0 mac=ba:dc:af:e4:be:e0" | nc -w 1 dbbcho 6789 | > echo "tengbcfg eth0 mac=ba:dc:af:e4:be:e0" | nc -w 1 dbbcho 6789 | ||
| > echo "tengbcfg eth0 ip=192.168.1.21 port=46227 nm=27 gateway=192.168.1.1" | nc -w 1 dbbcho 6789 | > echo "tengbcfg eth0 ip=192.168.1.21 port=46227 nm=27 gateway=192.168.1.1" | nc -w 1 dbbcho 6789 | ||
| - | > echo "tengbarp eth0 14 90:E2:BA:C6:9E:58" | nc -w 1 dbbcho 6789 | + | > echo "tengbarp eth0 13 90:E2:BA:C6:9E:58" | nc -w 1 dbbcho 6789 |
| - | > echo "destination 0 192.168.1.14:46236" | nc -w 1 dbbcho 6789 | + | > echo "destination 0 192.168.1.13:46236" | nc -w 1 dbbcho 6789 |
| --- //[[Guifre]] 2019/09/03 01:41// | --- //[[Guifre]] 2019/09/03 01:41// | ||
/home/www/auscope/opswiki/data/attic/network.1567487886.txt.gz · Last modified: 2019/09/03 05:18 by Guifre
Page Tools
