This wiki is not maintained! Do not use this when setting up AuScope experiments!

Differences

This shows you the differences between two versions of the page.

--- observing:hohb [2016/10/21 20:42]
Jamie McCallum
+++ observing:hohb [2016/11/02 23:57] (current)
Bryn Emptage
@@ Line 1: / Line 1: @@
+The latest series of HOB experiments are using X-band for observations on the Hobart12-Hobart26 baseline. To get the best sensitivity we are using the DBBC for Hobart26, rather than the mark4 rack. We use the S/X receiver on the 26m.
+====== Hobart12m ======
+Drudg the experiment file as normal, but please note that you will need to run ''setupxx'' rather than ''setupsx''. Only 8 IFs are being monitored in caltsys (BBCs 1-8, but both USB and LSB channels) and the autocorrelations will appear differently (with the second 8 channels having reversed shapes to the first 8).
 ====== Hobart26m ======
@@ Line 8: / Line 14: @@
     - ''drudg hob006.skd''
     - Check equipment with option ''11'' - it should be set to DBBC and Mark5B for the rack and recorder.
-    - Return to the main menu and produce a proc file with ''12' and snap file with ''3''
+    - Return to the main menu and produce a proc file with ''12'' and snap file with ''3''
     - Copy a previous experiments proc file across to current experiment (these are fairly heavily customised at the moment) with ''cp /usr2/proc/hob005ho.prc /usr2/proc/hob006ho.prc''
   * On ''hobart'', terminate the FS and then run the following commands: