This wiki is not maintained! Do not use this when setting up AuScope experiments!

Differences

This shows you the differences between two versions of the page.

--- operations:26mpointing [2018/05/28 02:33]
Jim Lovell [Observing log]
+++ operations:26mpointing [2018/06/25 01:06] (current)
Jim Lovell [Observing log]
@@ Line 92: / Line 92: @@
 /148/0220 : Pointing run started
+/148/0400 : Results on TauA show big oscillation. Reverting to sys26m.01May2018.img which includes oscillation in gridded model, while I try to work out what's going on.
+/149 (29 May): Analysis shows wrong signs in encoder model file. New floppy ready to go:
+<WRAP center round box 60%>
+ sys26m 29/5/18\\
+ Y1 encoder model for\\
+ mystery encoder\\
+ Old pointing model + DC offset\\
+ sys26m.20180529.img
+</WRAP>
+/149/2300 : Pointing observations with new config started - Jim Lovell
+/151/2249 : Another new encoder model being trialed. sys26m.20180530.img - Disk label:
+<WRAP center round box 60%>
+ sys26m 30/5/18\\
+ Y1 encoder model for\\
+ mystery encoder\\
+ Old pointing model + DC offset\\
+ sys26m.20180530.img
+</WRAP>
+/151 - 2018/154 : pointing observations with the new configuration resulting in a new gridded model XY_GRID_20180604.BIN. Now loaded in sys26m from disk image newsmerd:~observer/floppyimage/sys26m.20180604.img. Disk label:
+<WRAP center round box 60%>
+ sys26m.20180604,img\\
+ New Y1 enc model: 00000003.bin\\
+ New gridded pointing model: 20180604\\
+ Jim Lovell\\
+/6/18
+</WRAP>
+/175.23:20 : Pointing verification tests started