This wiki is not maintained! Do not use this when setting up AuScope experiments!

Differences

This shows you the differences between two versions of the page.

--- operations:agenda2017_11_09 [2017/11/09 02:16]
Ross Turner
+++ operations:agenda2017_11_09 [2017/11/09 02:24] (current)
Ross Turner
@@ Line 10: / Line 10: @@
 General Issues:
-   - Calendar didn't include Hobart even though it was on the master schedule. The 26m was a late addition to the AUA schedule.
+   - Calendar didn't include Hobart even though it was on the master schedule. The 26m was a late addition to the AUA schedule. Should be avoided in future.
+      - Let Jamie know if you don't have access rights to the calendar.
       - nobs looks at master schedule. Warren's script already checks master schedule.
+      - CHECK THE MASTER SCHEDULE! and the start time.
+  - Jesse sent around an email about script. Works for ho, hb, ke and yg, and opens most of the windows needed.
+      - didn't put delay plots in the right position; this is because they were already open.
+      - run windex before windows if there is stuff open.
 Handover Issues:
@@ Line 23: / Line 28: @@
      - Similarly, fringe testing is quite rubbish these days.
   - Yg: alarms going off for illegal state error and unable to read systemclock1. antenna=open antenna=operate fixed the issue (R1816)
+     - Bryn breaks stuff. This issue has come up for both Tiege and Liz too. HMI clock get confused about the time; need to reset if the simple fix fails.