User Tools
operations:documentation.ivs.finishing
This wiki is not maintained! Do not use this when setting up AuScope experiments!
Differences
This shows you the differences between two versions of the page.
| Both sides previous revision Previous revision Next revision | Previous revision | ||
|
operations:documentation.ivs.finishing [2011/04/03 21:22] Jim Lovell |
operations:documentation.ivs.finishing [2011/12/05 05:25] (current) Jim Lovell |
||
|---|---|---|---|
| Line 2: | Line 2: | ||
| At the end of an observation, the antenna should return to stow. After it has, exit from the Field System, by typing the following command in the ''oprin'' window: | At the end of an observation, the antenna should return to stow. After it has, exit from the Field System, by typing the following command in the ''oprin'' window: | ||
| <code>terminate</code> | <code>terminate</code> | ||
| - | And make sure pmSTALM exits by typing Ctrl-C in the xterm it runs in. | + | Fill in as much of the "After" section of the [[software:auscope_checklist|checklist GUI]] that you can, then exit it with a "File->Exit". |
| + | Exit the log monitor program. | ||
| + | |||
| + | If Yarragadee is observing, email the operator to let him know the observation is finished and the telescope has gone to stow at moblas@midwest.com.au | ||
| + | |||
| + | Please power-down the stairwell monitors using the switches under the main desk labelled Screen 1, Screen 2, ... when finishing an experiment or after hours to save power. | ||
| + | |||
| + | If another experiment follows this one, go to the next step: [[operations:documentation.ivs.newstart|following on with another observation]]. | ||
/home/www/auscope/opswiki/data/attic/operations/documentation.ivs.finishing.1301865749.txt.gz · Last modified: 2011/10/26 06:37 (external edit)
Page Tools
