This wiki is not maintained! Do not use this when setting up AuScope experiments!

Differences

This shows you the differences between two versions of the page.

--- operations:documentation_ops2_cont14 [2014/05/07 10:28]
Vasaant Krishnan
+++ operations:documentation_ops2_cont14 [2014/05/07 10:31] (current)
Vasaant Krishnan [Some Additional Ho 26m Notes]
@@ Line 122: / Line 122: @@
 ===== Some Additional Ho 26m Notes  =====
-It is useful to be able to graphically view the 20K and 70K receiver temperatures as well as the pressure vary with time.
+It is useful to be able to graphically view the 20K and 70K receiver temperatures, as well as the pressure vary with time.
-Start by:
+On Ops2 start by:
-<<code>>> ssh oper@hobart
+<code>>> ssh oper@hobart
 >> cd /usr2/log/
 >> logpl</code>
 This will open up a GUI called: **LogPlotter 2**.
-Now open a log file by clicking **File** --> **Open Log** in the header of the GUI. In the window that now pops up, input the log name (e.g. c1403ho.log) and open the file.
+Now open a log file by clicking **File** --> **Open Log** in the header of the GUI. In the new window that pops up, input the log name (e.g. c1403ho.log) and open the file.
 Go to **Plotting** and select
@@ Line 137: / Line 137: @@
 rx-9-pres</code>
-The plots do no update automatically, so issue **File** --> **Open Log** when an update is required.
+The plots do no update automatically, so restart the process with **File** --> **Open Log** when an update is required.