This wiki is not maintained! Do not use this when setting up AuScope experiments!

Differences

This shows you the differences between two versions of the page.

--- operations:yarragadeerfi [2011/05/03 05:30]
Jim Lovell created
+++ operations:yarragadeerfi [2011/10/26 06:37] (current)
@@ Line 1: / Line 1: @@
+====== S-band RFI from USN WA01 13m. ======
 USN antenna at stow, LRO transmit config.
-Plots show S-band IFs received on AuScope 12m, at stow (Az=1, El=88).
+Plots show S-band IFs received on AuScope 12m, at stow (Az=1, El=88). First LO is 1900 MHz.
-USN transmitter off:
+===== USN transmitter off: =====
 LCP received:
-{{:operations:lcp_stow_trans_off.png|}}
+{{:operations:lcp_stow_trans_off.png?500|}}
 RCP received:
-{{:operations:rcp_stow_trans_off.png|}}
-USN RCP transmitter on:
+{{:operations:rcp_stow_trans_off.png?500|}}
+===== USN RCP transmitter on: =====
 LCP received:
-{{:operations:rcp_uplink_lcp_rx_usn_at_stow.png|}}
+{{:operations:rcp_uplink_lcp_rx_usn_at_stow.png?500|}}
 RCP received:
-{{:operations:rcp_uplink_rcp_rx_usn_at_stow.png|}}
-USN LCP transmitter on:
+{{:operations:rcp_uplink_rcp_rx_usn_at_stow.png?500|}}
+===== USN LCP transmitter on: =====
 LCP received:
-{{:operations:lcp_uplink_lcp_rx_usn_at_stow.png|}}
+{{:operations:lcp_uplink_lcp_rx_usn_at_stow.png?500|}}
 RCP received:
-{{:operations:lcp_uplink_rcp_rx_usn_at_stow.png|}}
+{{:operations:lcp_uplink_rcp_rx_usn_at_stow.png?500|}}