====== DBBC v104 testing at Yg ======
  * Edited /usr2/control/equip.ctl and changed version to v104
  * on DBBC, started DBBC2 Control DDC v104_2.exe
  * created dbbc_config_file_104_calibration.txt
  * in pcfs:
    * dbbc=load=dbbc_config_file_104_calibration.txt
    * dbbc=reconf
    * dbbc=pps_sync
    * smlstat
    * smlrf=on (freq is 764 MHz, level = -25)
    * dbbc=calibration
    * wrote 2013-274T044906-calib.txt
      * First nulls at 80, 66, 76, 79
    * Oops, forgot about AGC loop (not sure how critical)
    * dbbc=dbbcgain=all,man
    * dbbc=calibration
    * wrote 2013-274T045548-calib.txt
      * First nulls at 82, 71, 86, 84
    * dbbc=dbbcgain=all,man
  * on DBBC, created these files in C:\DBBC_CONF with default phase settings as shown above
    * ''dbbc_config_file_104_point.txt''
    * ''dbbc_config_file_104_rapid.txt''
  * on PCFS in /usr2/proc, edit point.prc and station.prc to point to these new config files
  * smlrf=off
  * Tried :
    * proc=r4606yg
    * setupsx
    * caltsys : values looked plausible
    * proc=point
    * initp
    * virgoa
    * fivept
    * Offsets look good
    * onoff x 4. Some variation. RFI?
    * then a bunch of Tsys measurements at zenith. Numbers looks consistent?


{{tag>DBBC Yg}}


~~DISCUSSION~~