====== Schedule and Procedure files ======

  * The DynamicSnap.sh script operates by drudging a short-duration skd files and appending the snap commands to the end of the currently active schedule. To work, the active schedule needs to be prepared to reload itself, starting at a line number which corresponds to the beginning of the new data. On starting the dysched.pl script, a default ds.snp file is copied across to /usr2/sched/$sched$station.snp to serve as the template. This script includes some basic commands to load the dynamic scheduling procedure library and configure the rack and recorder. The text is included below. //You need to prepare a default schedule called ''/usr2/sched/ds.snp'' similar to this one.//

<code>
 " dyn1      2016 HOBART12 H Hb
" H HOBART12 AZEL  .0000 300.0    3   90.0  630.0  75.0    3    5.0   88.0 12.0 Hb Hb
" Hb HOBART12 -3949990.58300  2522421.17400 -4311708.24200 73741201
" Hb   HOBART12    0    10000
" drudg version 2015Jan29 compiled under FS  9.11.07
" Rack=DBBC      Recorder 1=Mark5B    Recorder 2=none
mk5=vsn?
disk_pos
setupsx
</code>

  * The dynamic observing script uses a fixed configuration, defined by the ds.prc file. When the dysched.pl script is started, this file is copied to /usr2/proc/$sched$station.prc where $sched is the schedule name given to dysched.pl, and $station is the station name (as given to dysched.pl). For the AuScope stations, the chosen mode is the 1 Gbps mode that has been typically used for the AUSTRAL experiment series, and a copy is included below. //Prepare your own file ''/usr2/proc/ds.prc'' to match the configuration of the experiment//

<code>
define  proc_library  00000000000x
" dynamic     HOBART12  Hb
" drudg version 2014Jul23 compiled under FS  9.11.06
"< DBBC     rack >< Mark5B   recorder 1>
enddef
define  exper_initi   00000000000x            
proc_library
sched_initi
mk5=DTS_id?
mk5=OS_rev?
mk5=SS_rev?
mk5=status?
enddef
define  setupsx       16053011358x            
pcalon
tpicd=stop
mk5b_mode=ext,0xFFFFFFFF,1
mk5b_mode
form=geo
form
dbbcsxd     
ifdsx       
cont_cal=off 
bbc_gain=all,agc,16000
tpicd=no,0
bank_check
tpicd
enddef
define  dbbcsxd       16053011358x            
bbc01=612.99,a,16.00
bbc02=652.99,a,16.00
bbc03=752.99,a,16.00
bbc04=912.99,a,16.00
bbc05=1132.99,b,16.00
bbc06=1252.99,b,16.00
bbc07=1312.99,b,16.00
bbc08=1332.99,b,16.00
bbc09=325.99,c,16.00
bbc10=345.99,c,16.00
bbc11=365.99,c,16.00
bbc12=395.99,c,16.00
bbc13=445.99,d,16.00
bbc14=465.99,d,16.00
enddef
define  ifdsx         16053011358x            
ifa=1,agc,1,40000
ifb=4,agc,4,48000
ifc=2,agc,2,32500
ifd=2,agc,2,35000
lo=
lo=loa,7600.00,usb,rcp,1
lo=lob,7600.00,usb,rcp,1
lo=loc,1900.00,usb,rcp,1
lo=lod,1900.00,usb,rcp,1
enddef
define  checkmk5      00000000000x
scan_check
!+1s
sy=/home/oper/bin/auto_cor_check_2bit.sh &
mk5=get_stats?
mk5=get_stats?
mk5=get_stats?
mk5=get_stats?
mk5=get_stats?
mk5=get_stats?
mk5=get_stats?
mk5=get_stats?
mk5=status?
enddef
</code>