====== AOV035 ======

**Hobart 26m**

Disk VSN: HOB+0125/32000/1024 | Data volume at beginning: 15.9 TB

   * 1725UT - Cryo monitoring system not working at Ho (ERROR ma   -4 Device rx timed-out on response). I have replaced the cryomon and rxmon procedures with nops in EXPERIMENT procedure library for the time being, because otherwise it waits for each rx measurement to time out. I have also commented out the rxmon command in the midob procedure in STATION library, as that is also waiting for timeout, and screwing up scan timing. (Patrick)
   * 1725UT - ''wx'' command not working. Returning the following errors: (Patrick)
     * ''wx#Problem connecting to metserver socket''
     * ''wx#Illegal error class code: 0xffffffff''
   * 1730UT - Experiment started OK (Patrick)
   * 1842UT - Windstowed from 18:42 - 19:25. (Patrick)
     * Missed scans: 134-1841b thru 134-1924b
   * 1925UT - Field system time out of sync (''ERROR sc  -13 setcl: formatter to FS time difference 0.5 seconds or greater''). Fixed by running ''sy=run setcl offset'' in oprin. (Patrick)
     * Also at 20:46, 22:47, 22:52
   * 2300UT - Fixed rxmon/cryomon (ERROR ma   -4 Device rx timed-out on response) by resetting TTY distributor with "reset" switch on old S/X MarkIV rack. Serial communications from Hobart to s/x receiver are still patched through this rack. (Warren and Brett)
   * 1200UT- Onsource status is slewing (Momtaz)!

**Katherine 12m**

Disk VSN:HOB+0015 | Data volume at beginning: 0.0 GB

   * 1730UT - No system temperature measurements. Restarted DBBC pc, which fixed it. (Patrick)
   * 1730UT - Experiment started OK (Patrick)

**Yarragadee 12m**

Disk VSN: HOB+0131 | Data volume at beginning: 0.0 GB

   * 1730UT - Experiment started OK (Patrick)
   * 1730UT - no connection to Yg maser (Patrick)


{{tag>}}


~~DISCUSSION~~