====== aug004 ======

 **Hobart 12m:**

//Disk VSN: HOB+0126, Data volume at beginning: 85 GB//

  * Pointing solution: 2015.023.23:10:04.24#fivpt#xoffset  223.1793   79.2251   0.00554  -0.01362  0.00242  0.00285 1 1 1618m49


 **Katherine 12m:**

//Disk VSN: GSFC+022, Data volume at beginning: 85 GB//

  * Pointing solution: 2015.023.23:09:44.20#fivpt#xoffset 175.8087 54.1101 -0.00089 0.00246 0.00199 0.00424 1 1 1618m49
  * UT 14:44 Single alarm sounded at 14:40 '' ALARM: scan_check reports Mark5 data format problem'' looks to be no consequences or repetition. (JS)


 **Yarragadee 12m:**

//Disk VSN: USN-0002, Data volume at beginning: 24 GB//

  * Note that iread values are bad (S-band):

  * /ifa/1,agc,1,25000,34,25468

  * /ifb/4,agc,4,29000,18,28689

  * /ifc/2,agc,2,35000,63,38131

  * /ifd/2,agc,2,35000,63,44721


  * The following point checks were done:

  * 2015.023.23:14:09.20#fivpt#xoffset  150.4285   64.2660   0.05054   0.00538  0.00707  0.06890 0 1 1618m49

  * 2015.023.23:41:07.22#fivpt#xoffset  105.3795   39.5677   0.00000   0.00538  0.01255  0.06890 0 0 1921-293   

  * 2015.023.23:52:16.17#fivpt#xoffset  163.0582   67.6059   0.00000   0.00538  0.00620  0.06890 0 0 1618m49

  * The first scan (3C279 at 024-0000) was missed. It appears that bank A of the mk5 does work properly. The troubleshooting was as follows:

  * USN-0002 could not be recorded to in bank A, so it was swapped with HOB+0031 in bank B.

  * USN-0002 could be recorded to in bank B - the module is fine. Swapped to bank A for the schedule.

  * Schedule started, and mk5 issued errors on recording; I thought I checked recording in bank A after the swap, but it appears I did not. Recorded to bank B in time for the second scan.


  * UT 12:43 iread values are still bad but haven't drifted (JS)
  * /ifa/1,agc,1,25000,34,24567
  * /ifb/4,agc,4,29000,18,28779
  * /ifc/2,agc,2,35000,63,37537
  * /ifd/2,agc,2,35000,63,44248

  * **The long and short of the disk swap business above is: The module that needs to be recorded to next (AUG005 @11am local time) is in bank A, but Chris was unable to verify if bank A can be recorded to. This module may need to be physically moved to bank B for recording.** (JS)

~~DISCUSSION~~