====== aust53 ======

Hobart (26m)
  * Recording to 4 TB module USN-0014 in bank B, +0 GB (Chris)
  * (11:50 UT) Just noticed that the receiver has become unlocked at a few points (Chris)
  * 10:33 UT
  * 10:38 UT
  * 11:08 UT
  * 11:09 UT
  * 11:13 UT
  * 11:48 UT
  * 13:00 UT Moved dish about and seemed to fix unlock problem by about 12:30 with some subsequent intermittent (mostly momentary) loss of lock.(warren)
  * lost lock at 18:38 to 18:47 (w)
  * again unlocked 20:20 and 21:02 and 21:20 (w)
  * The LO unlocked several times for short periods from 23:00 till 01:30 UT (Liza)
  * rxp#Receiver focus X : -256.4mm ; Y : 250.8mm ; Z : 18.6mm; -- Y should be 248mm (Liza)
  * 04:38 UT: wiring error of pps at Hobart was corrected. Don't know what the impact was before  (Liza)
  * * 2014.289.05:24-05:36 LO reported to be unlocked, no alarm on occurence (Liza)


Hobart (12m)
  * Recording to 6 TB module HAY-0055 in bank B, +0 GB (Chris)
  * Anemometer is not connecting (Liza)
  * RFI: common problem in ch 14, 15 (0-15) (Liza)
  * 04:38 UT: wiring error of pps at Hobart was corrected. Don't know what the impact was before
  * 05:58UT: RFI: new indication in channel 11 (0-15), periodically occuring spike and phase errors. Was noticed also once before (RD1409 or aust50) (Liza)

Katherine
  * Recording to 8 TB module HOB+0068 in bank A, +0 GB (Chris)
  * Running on an SSH remote-control (Warren, Liza)

Yarragadee
  * Recording to 6 TB module OAN+0103 in bank A, +0 GB (Chris)
  * Recording error documented (Liza): 
      2014.289.04:55:01 ALARM: error m5 -104 mk5cn: time-out, connection closed
      2014.289.04:55:07 ALARM: error m5 -104 mk5cn: time-out, connection closed
      2014.289.04:55:07 Alarm acknowledged
      2014.289.04:55:12 ALARM: error m5 -104 mk5cn: time-out, connection closed
      2014.289.04:55:14 WARNING:  0 : 0x02340003 : 23 : data read error ; 

{{tag>}}


~~DISCUSSION~~