====== c1706/v1706 ====== **Hobart 26m:** Disk VSN: HOB+0094 Date volume at beginning: 7221.148 GB * 00:00 UT - experiment started OK (Patrick) * 00:00 UT - Lots of windstows, check with 'grep wind c1706ho.log' * 02:55 UT - Telescope does not reach stow sometimes when windstowing. Keep an eye on the live page, and issue an extra 'source=stow' command if the elevation is not changing. (Patrick) * received multiple warning of windstows, error m5 -900:already off, and error f1 -1 previous source in this schedule not reached before new source was commanded (04:46:10 UT till 07:01:38 UT) (mas) * At 07:00:00 UT, Warren called and halted the schedule for Hobart 26m (mas) * Started recording again at 07:24:37 UT (mas) * Received Alarm:error f1 -1 previous source in this schedule not reached before new source was commanded at 10:31:30 UT,10:34:24 UT, 10:38:23 UT, 10:40:52 UT, 10:44:02 UT, 10:45:48 UT, 10:50:12 UT, 10:52:24 UT, 10:54:20 UT, 10:57:12 UT, 10:59:20 UT,11:02:06 UT, 11:09:44 UT, 11:18: 13 UT and 11:20:06 UT. The left and right drives are OFF. Hydraulics fault/OFF. Have tried remote reset via the v-desk terminal on newsmerd, but activity idle. Have informed Warren and he go to Mt Pleasant. (mas) * Halt the schedule at 11:21:44 UT (mas) * Missed scans from scan 337-1033 to 337-1146 (mas) * Start recording again at 11:50:09 UT (mas) * 1806 UT missed scan 337-1806b due to slow slew speed. (Bryn) * 1909 UT missed scan 337-1909 due to slow slew speed. (Bryn) * 2330 UT missed scan 337-2327 missed, probably same slow slewing (Liz) **Katherine 12m:** Disk VSN: USN+0224 Date volume at beginning: 0 GB * 00:00 UT - experiment started OK (Patrick) * 2334 UT - at 22:00 UT approx. delay difference appears to start drifting rapidly (linear-like drift), may have stabilised at ~ -0.335 in the last few scans. Will monitor until end of experiment (in about 20mins), then reconfigure dbbc in break. (Liz) **Yarragadee 12m:** Disk VSN: HOB+0074 Date volume at beginning: 4189.252 GB * 00:00:00 UT - experiment started OK (Patrick) * 1800 UT - Humidity Sensor giving nonsense readings again (Bryn)