====== CRDS96 ======

**Hobart 26m**

Disk VSN: HOB+0119/32000 | data volume at the begining 19828.475 GB.

1800UT- Experiment started OK (mas)

When experiment started, received " WARNING: error qo -301 warning: onsource status is slewing!" for each scan. All clocks at FMSET are synchronise. 

23:30UT - Autocorrelation spectra not updating. Lucas fixed based on similar error where procedure file didn't include checkmk5 command (Ross).

13:45UT - 70K stage at ~90K and climbing, pressure at 3.6 microns mercury. Heading out to Mt Pleasant to fix. (Patrick)

**Katherine 12m**

Disk VSN: HOB +0088/8000 | data volume at the begining 1.795 GB.

1800UT- Experiment started OK (mas)

When experiment started, received "Warning: error tc -301 continuous cal not enabled for dbbc" for each scan

23:21UT - After discussion with Warren decided to reboot dbbc to see if that fixed continuous cal error. Halted after scan no0385, first good scan no0388 (Ross).

00:08UT - Noticed difference in procedure file between crds96 and previous crds experiments and corrected this error; missed scan no0394. Error still present, leaving for Warren to look at later (Ross).

13:29UT - Fixed continuous cal not enabled error by changing ''cont_cal=off'' to ''cont_cal=on'' in the ''setup01'' function of the procedure file, based off the previous crds95 procedure file. (Patrick)


**Yarragadee 12m**

Disk 1 VSN: GSFC+022/8000 | data volume at the begining 1.923 GB. Recorded 7469.724 GB on this disk.

Disk 2 VSN: BKG-0065 | data volume at the begining 0.0 GB. 

1800UT- Experiment started OK (mas)

16:09UT - Manually drudged summary files. Noticed that data for Yg & Ho is 8064GB, while module in mk5 is 8000GB. Called up Yg and swapped modules inbetween scans. Resumed schedule with scan No0551 at 16:11:58 (1:48 into scan). (Patrick)