====== T2109 ======
**Hobart**

Module: USN+0220, start pos: 1651.8 GB 

  * 1730 UT Experiment started OK (JS)
  * 2120 UT S-band temps exceptionally high 363--400K for CH 09 -- 12
  * 2125 UT S-band temps stabilised (~130K)
  * 0542 UT Hobart had the following two errors (AK)
       - 05:42:28 WARNING: error an -103 pointing computer tracking errors are too large.
       - 05:42:28 WARNING: error qo -301 warning: onsource status is slewing!


**Katherine**

Module: OSOD-118, start pos: 1634.1 GB (total 132.9 GB recorded here)

Module: USN-0137  start pos: 876.7 GB

  * 1730 UT Experiment started OK (JS)
  * 2042UT moved to module USN-0137 since there isn't enough room on the other module (JS)
  * 0023 mark5 crashed, rebooted with Dave Horsley's help. Missed two scans (AK)
      - 048-0023a  823 1954-388 154 62 CCW    00:23:02  00:29:51    6:49   283.0 
      - 048-0035   840 1424-418 230 24 CCW    00:35:10  00:37:05    1:55   289.5 
  * 0102 formatter to fs time difference was 2 secs, fixed using fmset when telescope was not recording, as per wiki guidelines (AK). 
  * 0331 UT Katherine threw two errors, consulted with Ellen Manning, errors are listed below (AK)
      - 03:31:20 WARNING: error an -103 pointing computer tracking errors are too large.
      - 03:31:20 WARNING: error qo -301 warning: onsource status is slewing!
  * 0524 UT katherine threw the same two errors listed in the comment above (AK)
  * mk5=dot? time was slightly high, approx 13 ms. Consulted with Jamie who suggested running "sy=run setcl offset & " when no data is being recorded. Time was constant around 13 ms even after running the command (AK)

**Yarragadee**

Module: HAY-0028, start pos: 0 GB

  * 1730 UT Experiment started OK (JS)
  * 11:30UT: Yarragadee want to be called when experiment is finished (18:00) to change over modules (NH)



~~DISCUSSION~~