====== Hobart shipping paperwork, part 1 ======


  * Remove module from the Mark5B recorder and put a red sticker over the green dot. The sticker will (should) be on the workbench under the whiteboard. 
  * Go to the printer in the office and put a sheet of sticky labels into the printer's tray (printable side down, and make sure it's the correct size with 7 rows and 2 columns) and note the row and column of the label to be printed to (Counting from the top left of the sheet as you look at it in the tray). 
  * On pcfshb, run <code>cd /usr2/log
drudg <log file> all <x> <y>
</code> where ''x'' and ''y'' are the row and column index of the label to be printed. for example:<code>
drudg r4457hb.log all 2 3
</code>
  * Collect the printed label and put it on the front of the module where it says "Library Label"
  * Check the destination of the experiment using the [[http://lupus.gsfc.nasa.gov/sess/master11.html|IVS master list]]. 
  * From the metal filing cabinet in the office, from the drawer marked ''NGS ENCODERS CEDUNA TIMING'' take:
    * a DHL airways form, 
    * a plastic dhl envelope, 
    * address label for the destination correlator and 
    * an experiment label sticker . 
    * Fill out the DHL address following the examples below.  Make a note of the billing number on the printed log sheets. %width=900px% http://www-ra.phys.utas.edu.au/~jmccallu/Washington.jpg"Washington" %width=900px% http://www-ra.phys.utas.edu.au/~jmccallu/Bonn.jpg"Bonn"