===== Setting VSN labels =====

<note warning>DO NOT use this procedure if there is already data on the module.  It will erase the data</note>

If the VSN reported by e-Remote control doesn't agree with the sticker, do the following:

First make sure you have the correct module selected, then...

If the bar-coded label says, for example "HOB+0056", at e-Remote Control prompt:
<code>
mk5=protect=off
mk5=vsn=HOB+0056
mk5=vsn?
</code>
The last command should return the label name, disk capacity (in GB) and block size. Confirm that this agrees with the label.