**Chair:** Ross

**Attended:** Tiege, Lucas, Patrick, Atifur

**Apologies:** Arwin, Jonny, Simin, Katie, Mas, Jamie, Lucia

**Absent:**

**General Issues**

  * Yg said they don't get information about the disk space required for an experiment from the new schedule format (.vex experiments?).
     * Experiment only 60GB over and observers didn't notice heaps in advance since vex files not drudged locally, no summary files. 
     * Should go to newsmerd:/vlbobs/lba , make directory called experiment (crds96), put the vex file inside there.

  * Yg also said that sometimes the module spreadsheet is not updated (w.r.t. which modules are assigned to experiments).
     * Warren hadn't updated this for crds96, not for two ho only experiments but presumably because not needed by anyone else.
     * Bring up with Warren.
   
**Handover Issues** 

  * r4848 (ke) - Can't access maserke vnc, but can ping the machine.
  * crds96 (ke) - received “Warning: error tc -301 continuous cal not enabled for dbbc” for each scan. Fixed continuous cal not enabled error by changing cont_cal=off to cont_cal=on in the setup01 function of the procedure file, based off the previous crds95 procedure file.
     * Patrick noticed this the week before. Because experiment drudged manually in the wrong location, it didn't have ke specific procedures. 
     * Version was different to normal, suggesting drudged in a different place. 
  * aov024 (ho) - Was getting “ERROR sc -13 setcl: formatter to FS time difference 0.5 seconds or greater ”. Ran sy=run setcl offset into the newsmerd fs window (oprin)
  * r1847 (ke) - noticed coordinates had not changed, checked to see the FS had crashed. Restarted FS and the schdule, missing data from 0729 UT till 08:22 UT. It appears log monitor had also stopped responding.
  * r1847 (yg) - Humidity sensor appears to not be working.
     * Could maybe restart monica weather server??? 

  * crf107 (ho) - rxp is not providing focus position info, instead it is returning error about connection with remote host lost. Live page says receiver position is correct.
  * crf107 (ho) - cryomon had negative pressure, likely a bug.
   
  * Sound not working on ops8!!
     * Restarted computer and tried a different set of speakers. 
     * Sound card not working
     * Use ops4, mobile phone alert and/or byo usb speakers.
  * What are the ftp links for the vex files, if we can't find the summary files?