**Chair:** Patrick

** next week's chair: ** ?

**Attended:** Patrick, Tiege, Earl, Jamie

**Apologies:** Prad, Katie, Ross

**Absent:** Lucas

**General Issues**
    * When do observations start in the New Year?
      * **First session 2nd January (R4)**
      * Additional sessions (not regular IVS) will be added in
    * Warkworth will join a series of new AUSTRAL experiments next year (30-40)
    * First 2020 meeting: **16th January**
      * If there are problems in last 2 weeks of 2019, contact Jamie/Warren

**Handover Issues**
   * AUA058
      * Experiment started late due to disagreement between IVS schedule & observer roster
        * AUA scheduled at a weird hour
        * Double check IVS schedule and AuScope schedule (**might happen more often**)

   * AOV042
      * **Ho:** Started late, drives weren't turning on. Fixed on its own after ~10 minutes.
        * Brett has worked on drives. One of the drives was not responding quick enough, should be fixed. Need to keep trying till it works.
      * **Ho:** PCFS crashed. Restarted and received ''Allocating memory for antenna monitoring'' error. Fixed with a reboot of drive pc and pcfs
        * Fixed by killing all vdesk connections, then rebooting drive pc and pcfs if problem persists
      * **Ho:** PCFS locked up. Restarted vdesk.
        * Same problem as above
   * AUA059
      * **Ho:** RXP network connection down
        * Something to do with drive pc and RAKBUS
      * **Ho:** PCFS crashed.
   * T2136
      * **Ho:** PCFS crashed. Restarted and received ''Allocating memory for antenna monitoring'' error. Fixed after rebooting drive pc (twice) with ''rem_reboot -r rakbus sys26m''
      * **Ho:** After drive reboot, receiver switched to Warm S-Band (on its own?). Experiment halted to investigate, Warren went up to receiver cabin and manually changed to S/X. Rebooted rx26m, still something wrong with rx comms.
        * Related to power outage?
   * CRF115
      * **Ho:** S/X receiver in position, but in manual mode, display will be wrong.
        * In manual mode, live page & rxp should show correct readings most of the time, but OTTER won't.
        * X,Y,Z should be correct (read off camera) & reliable
        * On RXP display, number only matters if you're using the multifeed