**Chair:** Lim

** next week's chair: ** Simin

**Attended:** Lucas, Katie, Prad, Jay, Mas, Earl, Simin, Eloise, Becca, Jamie, Ross, David, Gabor

**Apologies:** Tiege, Patrick

**Absent:** 

**General Issues**
    * Yarragadee
        * VNC connection to maseryg?
            * Accessible through vnc maseryg:2 [password is some German word on the AuScope room board]
    * Mixed-mode training? 
        * Search AUM-HB on the wiki
        * Drudg by hand
        * One line summary to check if DBBC is correctly setup under ~/bin/aum.query.summ.py on pcfs or ops8.
        * More mixed-mode coming if the next is successful.
        * S-band is recording on DBBC2 atm.

       
**Handover Issues**
    * CRD105 
        * Hobart26m
              * FS locked up while investigating GPIB comms issue. PCFS machine rebooted (JMc).
              * Cleared afetr reboot
    * AOV044
        * Hobart26m
              * 1954UT fs crashed 
                  * No apparent reason?
              * 2120UT Power failure led to DrivePC failure
              * Error: Cannot get monitor info from antenna (8020003); #antcn#Network I/O Timeout occurred on write
                  * Need to restart DrivePc (sys26m)
              * 0812UT Power failure again
                  * The RA/Dec/time values which were static earlier, now started changing after restarting DrivePC
              * 0910UT - Drives weren't ready on time for the last few scans. “drvon” on vdesk a few times seemed to have done the trick. Left drive (on) delay causing the problem? (Prad)
              * DrivePc or fs has to be restarted
              * Really need to "drvon" quite a lot on vdesk

Note: Don't rely on first start for the 26m Hobart, don't start only 5 minutes earlier.